Server Registration; Locating Your Snap Server On Your Network - Adaptec Snap Server 110 User Manual

Server Registration

Register your server to receive Adaptec services and support, to create and track
service requests, to download software updates, and to receive exclusive
promotional offers.
To Register a Single Server
Until you register, the Registration window will appear as your opening screen
every time you start the Guardian OS. Click the
browser window where you can register your server.
You can also register multiple Snap Servers in one operation using SSM. For
Note
more information, install SSM (see page 10) and refer to "Using SSM to License
Multiple Snap Servers" on page 31.

Locating Your Snap Server on Your Network

Once installed on your network, the Snap Server appears as a server with a shared
folder. You can use it to organize and store files in the same way that you use the
folders on your local hard disk drive.
In general, you can use the following guidelines to connect to the Snap Server.
These guidelines are described in more detail on the following pages.
To connect to the server using:
Microsoft Windows
Macintosh
Web browser
NFS
FTP
Do this:
®
Look for the server in Network Neighborhood, My
Network Places, or Network. If the default
settings were not changed during installation, it will
appear under Workgroup.
Connect to the server using the Chooser, Network
Browser, or Connect to Server.
Enter the server name or IP address in your Web
browser's location or address box.
Mount the desired share using the server name or
IP address.
Enter the server name or IP address in your FTP
client application.
Locating Your Snap Server on Your Network
link to open a separate
Click here
Chapter 1 Installing the Snap Server 13