Use The Server Tab To - Adaptec Snap Server 110 User Manual

Using the Administration Tool

Use the Server Tab to...

• Change server settings — Modify the server name, date, and time.
• Set up email notification — Set up the server to send out email notifications
when events occur (such as a server restart, server overheating, drive failure,
RAID rebuild, trial license expiration, or volume space reaching limit).
• Configure Secure Shell (SSH) — SSH is a service that provides a remote console
for special system administration and customer support access to the server.
SSH is similar to telnet but more secure, providing strong encryption so that
no passwords cross the network in clear text.
Caution
start a supported backup agent, or under the direction of a technical support
representative. To maintain security, disable SSH immediately after the task is
complete.
• Configure UPS as your power source — Adaptec recommends that you use an
APC-brand UPS as a power source to ensure a clean shutdown in the event of
an extended power failure, and to automatically restart the server when the
power outage is over. Use this screen to enable UPS in the GuardianOS. You
will also need to configure the UPS in the APC user interface.
• Set your server up to be a print server — Set your server up to be a print
server for USB-connected printers.
24 Snap Server 110/210 User Guide
SSH is disabled by default, and should only be enabled to install or