Creating A Disaster Recovery Image; Using Your Snap Server As A Print Server; Configuring The Printer On The Snap Server - Adaptec Snap Server 110 User Manual

Creating a Disaster Recovery Image

Create a disaster recovery image (DRImage) on the
page. This DRImage should be created after the server configuration is complete,
and can be used to recover the server or a replacement server to the configured
state. Review the Disaster Recovery topic in the online Help for more detailed
information.

Using your Snap Server as a Print Server

The Snap Server can be configured to emulate a Windows print server for up to four
locally-attached USB printers. Client machines connect to the Snap Server over the
network and share the printers. You can pause or resume the printer, and monitor
or cancel print jobs using the Administration Tool.
Configuring your Snap Server as a print server is a two part process.
• First configure the printer on the Snap Server.
• Next configure the client to print via the Snap Server.

Configuring the Printer on the Snap Server

Connect the printer to one of the USB ports on the Snap Server.
1
Power on the printer.
2
In the Snap Server's Administration Tool, navigate to
3
currently defined USB printers is displayed. To add the new printer, click
Local Printer
The Snap Server will detect the new printer and it should appear as an option in
4
the
Local Printer Device
.
dropdown list. Select that printer.
Using your Snap Server as a Print Server
Maintenance > Disaster Recovery
Server > Printing
Chapter 3 Customizing Your Snap Server
. A list of
Add
45