Adaptec Snap Server 110 User Manual page 21

In the Search for Computers dialog box,
3
enter the server name and click
. By default your server name is based
Now
on the server number. For example, a Snap
Server with the server number 30123 would
by default be named SNAP30123.
Wait for the server to appear (you may need
4
to try again after a few minutes if you have
just turned on the server).
Double-click the Snap Server icon to see a
5
folder that represents the network disk
drive(s).
Windows Vista
The Snap Server should automatically appear in Network under Workgroup if the
default setup was accepted during installation. If it does not appear, follow the
steps described here:
On the Start menu, click
1
and then
For Files or Folders
In the Search Results window,
2
select in the address bar's
Network
search context drop-down menu.
A message may appear in
Note
the window indicating that
Network Discovery is disabled. To
enable it, click the message and
select the appropriate icon. If
Discovery is not turned on, you
will not be able to see any servers
on the network, though you can
still connect directly to the server
by mapping a network drive letter
(see "Mapping a Drive in
Windows" on page 16).
Type the server name in the Search box and press
3
By default, your server name is based on the server number. For example, a
Note
Snap Server with the server number 30123 is named SNAP30123.
Wait for the server to appear (you may need to try again after a few minutes if
4
you have just turned on the server).
Locating Your Snap Server on Your Network
Search
Search
.
Chapter 1 Installing the Snap Server
.
Enter
15