General; Features - IDTECK SR10 User Manual

2. General

The IDTECK SR10/SR10U/SR10B Smart Card Reader is a proximity reader with the read range of
up to 4 inches (10cm) and can be installed on any wall.
IDTECK SR10 reads the serial number stored on the Philips Mifare™ card (ISO14443 Type A) and
transmits the data
to the controller
IDTECK SR10U reads the serial number stored on the
to the controller in various formats.
IDTECK SR10B reads the IDs stored on the user cards that have been issued using the
and transmits the data to the controller in various formats.
Three 2-color LED indicators (red and green) and a built-in Piezo buzzer will guarantee you accurate
and reliable system operations.

3. Features

Common
- 13.56MHz [MIFARE] Contactless Smart Card Reader
- Read Range: Up to 4 inches (10cm)
- 3-Array LED Indicators (Red and Green) and a Buzzer
- External LED Control
- External Buzzer Control
- Easy to install on Mullion Mounting suitable
- Solid Epoxy Potted (SR10E / SR10UE / SR10BE)
- Waterproof / IP65 / IP66 (SR10E / SR10UE / SR10BE)
- Warranty: Lifetime (SR10E / SR10UE / SR10BE)
- Reverse Polarity Protection
SR10
- ISO 14443 type A compatible
- Serial Number Read only
- 34bit Wiegand (default) / RS232, ABA Track II (optional) Output Format
- Compatible Controller: iCON100SR, iTDC-SR, Third Party Controller
SR10U
- ISO 14443 type A/B compatible
- Serial Number Read only
- 34bit Wiegand (default) / RS232, ABA Track II (optional) Output Format
- Compatible Controller: iCON100SR, iTDC-SR, Third Party Controller
in various formats.
ISO14443 Type A/B card and transmits the data
4
PRG2000B