Tadiran Telecom Coral SeaBeam Installation And Configuration Reference Manual page 56

Coral SeaBeam Installation and Configuration Manual
Area Field
Register with
domain and
receive
incoming calls
Domain
Proxy
Send outbound
via
Dialing Plan
Description
Select this check box if you want to register with
the Coral, so that you can receive incoming calls.
Typically, this field is selected.
A situation in which this field is cleared is, for
example, if your level of service does not include
the ability to receive incoming calls. In this case,
turning this field on might cause registration to fail
(when you close the Account Properties
window), meaning that your Coral SeaBeam
cannot register with the Coral.
Select the setting specified by your system
administrator:
Domain - Traffic is directed to proxies that are
discovered via the domain.
Proxy - Requires that you provide the
outbound proxy address to Coral SeaBeam.
For the address, enter a domain name (for
example, domain.com) or an IP address (for
example, 123.456.789.012).
Target domain: To send directly to the other
party's domain.
Information about the syntax of the numbers used
by the Coral.
The default plan is: #1\a\a.T;match=1;prestrip=2;
Configuring the Coral SeaBeam 51