Pre-Installation Requirements; Coral Seabeam User Data - Tadiran Telecom Coral SeaBeam Installation And Configuration Reference Manual

3
Table 3 Information
About Each Coral
SeaBeam User
Coral SeaBeam Installation and Configuration Manual

Pre-Installation Requirements

This chapter describes the procedures prior to installing the Coral SeaBeam softphone.

Coral SeaBeam User Data

................................................................................................................
Use the right column of the following table to record important information about each
Coral SeaBeam user: You can obtain this information from your system administrator
(see Table 13 on page 50
User Meaning
Details
User name The prefix of the user's SIP account
number (in Mike_Sip@172.50.5.28,
the user name is "Mike_Sip")
Password The user's SIP account password
(provided by your system administrator)
Authorization The user's SIP account user name
user name
(provided by your system administrator)
Domain The suffix of the user's SIP account
number (in Mike_Sip@172.50.5.28,
the domain is "172.50.5.28")
Proxy address The domain name (e.g,
and port domain.com) or IP address (e.g,
(might not be 123.456.789.012) of the outbound
required) proxy
Dial number The phone number other people
dial to call the user, such as 6789
(internal) and 456-6789 (external)
License key The user's Coral SeaBeam
activation key ( 64 characters)
for more details):
Info For Specific
Coral SeaBeam User
Pre-Installation Requirements 9