Coral System Minimum Requirements; Registering The Parameters In The Phone; Completing The Registration - Tadiran Telecom Coral SeaBeam Installation And Configuration Reference Manual

Table 5 Coral System
Requirements
Coral SeaBeam Installation and Configuration Manual

Coral System Minimum Requirements

................................................................................................................
In addition, ensure that the following Coral system minimum requirements are met:
Component Descriptions
Coral Main
Version 15.84 or higher
Software
PUGW
Version 9.12 or higher (Coral IPx 500, 800, 3000, 4000 and Coral
FlexiCom 400, 5000, 6000)
CUGW
Version 9.12 or higher (Coral IPx Office)
Sentinel Pro
Version 6.36 or higher (Tadiran SBC for secure NAT traversal)
License Tadiran SIP Terminal

Registering the Parameters in the Phone

................................................................................................................
The phone parameters can be configured locally from the softphone. To configure the
Coral SeaBeam parameters from the phone, see

Completing the Registration

................................................................................................................
1
Verify phone registration. See
2
Record the softphone's details on the form provided in
page 27.
IP-Ports: SIP Terminal (Route: IP,1,4), page
Pre-Installation Requirements
17.
Table 3 on page 9.
11