Tadiran Telecom Coral SeaBeam Installation And Configuration Reference Manual page 48

Table 11 Advanced Pane,
Network Tab
Coral SeaBeam Installation and Configuration Manual
Area Field
Network Select the
Connection speed of your
Speed network
connection
Preserve
bandwidth
during silent
periods
Call In times of
Inactivity network
disruption,
automatically
hang up calls
after:
DNS Primary DNS
server
Secondary DNS
server
Description
Complete this field only if you have disabled
zero-touch bandwidth detection (see
29).
Select the type of network connection for your
computer.
When this feature is on, Coral SeaBeam
stops sending audio when you are not talking.
When this feature is off, Coral SeaBeam
always sends audio, which uses more
bandwidth but might result in better call
quality.
Typically Off. However, if you are using a
slow (dial-up or ISDN) connection, you might
want to turn it On.
When this feature is On, Coral SeaBeam
automatically hangs up a call when it detects
the specified period of inactivity. In other
words, if you are on a call and the call gets
disconnected (the call session ends) because
of network problems (rather than because of
one of the parties hanging up), then Coral
SeaBeam ends the call after the specified
period.
Typically On. This feature might be turned Off
if, for example, a PBX server already handles
inactivity issues.
Optionally, enter addresses for up to two DNS
servers.
If these fields are completed, Coral
SeaBeam uses these servers.
If they are blank, Coral SeaBeam uses the
servers specified by the operating system.
Configuring the Coral SeaBeam
page
43