34
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled "Bluetooth Beep and LED Indications".
Note:
MX7 without Label
If the MX7 Bluetooth address barcode label does not exist, follow these steps to create a unique
Bluetooth address barcode for the MX7:
First, locate the MX7 Bluetooth address by tapping Start | Settings | Control Panel | Bluetooth |
About tab.
Next, create a Bluetooth address barcode label for the MX7
The format for the barcode label is as follows:
•
Barcode type must be Code 128.
•
FNC3 character followed by string Uppercase L, lowercase n, lowercase k, uppercase B
and then the Bluetooth address (12 hex digits, no colons). For example,
LnkB0400fd002031.
Create and print the label.
Scan the MX7 Bluetooth address barcode label with the Bluetooth barcode reader.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled "Bluetooth Beep and LED Indications".
Note:
Bluetooth Beep and LED Indications
Beep Type from Bluetooth Device
Acknowledge label
Label rejected
Transmission error
Link successful
Link unsuccessful
1
Free barcode creation software is available for download on the world wide web. Search using the keywords
"barcode create".
MX7 Reference Guide
After scanning the MX7 Bluetooth label, if there is no beep and no LED flash from the
remote Bluetooth device, the devices are currently paired.
Figure 1-24 About tab and Bluetooth Address
After scanning the MX7 Bluetooth label, if there is no beep and no LED flash from the
Bluetooth device, the devices are currently paired.
1
.
Behavior
1 beep
2 beeps at low frequency
Beep will sound high-low-high-low
Beep will sound low-medium-high
Beep will sound high-low-high-low
Bluetooth
E-EQ-MX7RG-L-ARC