Automatic Exposure Adjustment - Toshiba e-STUDIO 12 Operator's Manual

AUTOMATIC EXPOSURE ADJUSTMENT

The automatic exposure level can be adjusted to suit your copying needs.
Press the exposure mode selector key to select the PHOTO (
Press and hold down the exposure mode selector key for approximately 5 seconds.
The PHOTO (
One or two exposure indicators corresponding to the automatic exposure level which
has been selected will light up.
5
Press the light (
level as desired.
If exposure level 2 is selected, the two left-handmost indicators for that level will light
up simultaneously. Also, if level 4 is selected, the two right-handmost indicators for
that level will light up simultaneously.
Press the exposure selector key. The AUTO ( ) indicator will stop blinking and light
up steadily.
32
) indicator will go out and the AUTO ( ) indicator will begin to blink.
) or dark (
This automatic exposure level will remain in effect until you change it again by
this procedure.
) key to lighten or darken the automatic exposure
) mode.