Turning Bluetooth On Or Off; Setting And Changing The Bluetooth Pin Number; Registering And Deregistering The Bluetooth Headset - Panasonic KX-UDT131 Operating Instructions Manual

Turning Bluetooth On or Off

Before using Bluetooth to connect to a wireless
Bluetooth headset or to a cell phone, Bluetooth must be
set to "On" in the handset settings.
1.
Press or the [CENTRE] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Bluetooth Option",
and then press
4.
Press [ ] or [ ] to select "On/Off", and then press
.
5.
Press [ ] or [ ] to select "On" or "Off", and then
press .
Setting and Changing the
Bluetooth PIN Number
Before using Bluetooth to connect to a cell phone, you
must set the Bluetooth PIN number in the handset
settings.
1.
Press or the [CENTRE] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Bluetooth Option",
and then press
4.
Press [ ] or [ ] to select "Cell Phone", and then
press .
5.
Press [ ] or [ ] to select "Change BT PIN", and
then press .
6.
Enter the old PIN number.
7.
Enter a PIN number (4 digits), and then press
.
8.
Re-enter the same PIN number as in step 7, and
then press .
*1 If a PIN number has not been set previously, skip this step and
continue to step 7.
Note
•
The valid digits are 0–9.
Document Version 2012-11
.
.
.
.
*1
Registering and Deregistering the
Bluetooth Headset
You can use a wireless Bluetooth headset with a
handset. Before using a Bluetooth headset, you must
register it to a handset.
Registering a Bluetooth Headset
Notice
•
Perform any procedures on the headset
necessary for registering it before configuring
the settings on the handset. Otherwise, the
Bluetooth headset may not be registered.
To register a Bluetooth headset when none is
registered
1.
Press or the [CENTRE] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Bluetooth Option",
and then press
4.
Press [ ] or [ ] to select "BT Headset", and then
press .
5.
Enter the headset's Bluetooth PIN number, and
then press .
Note
•
Up to 4 digits can be entered for the Bluetooth
headset's PIN number.
To register a Bluetooth headset when one is
already registered
1.
Press or the [CENTRE] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Bluetooth Option",
and then press
4.
Press [ ] or [ ] to select "BT Headset", and then
press .
5.
Press [ ] or [ ] to select "Registration", and
then press .
6.
Press [ ] or [ ] to select "Register", and then
press .
7.
Enter the headset's Bluetooth PIN number, and
then press .
Feature Operations
.
.
.
.
Operating Instructions 33