Charging The Battery; Charger Wall Mounting - Panasonic KX-UDT131 Operating Instructions Manual

Charging the Battery

At the time of shipment, the battery is not charged. Please charge the battery for about 3 hours before
using the handset for the first time.

Charger Wall Mounting

1.
2.
•
Please copy this page and use as a reference for wall mounting.
Make sure to set the print size to correspond with the size of this page. If the dimension of the paper output
still deviates slightly from the measurement indicated here, use the measurement indicated here.
•
When mounting the charger, ensure that the correct screws are used for the type of wall.
•
Make sure that the wall that the charger will be attached to is strong enough to support the total weight of
the handset and charger (approx. 200 g). If not, it is necessary for the wall to be reinforced.
•
When this product is no longer in use, make sure to detach it from the wall.
•
When inserting screws, avoid pipes and electrical cables, etc, that may be present/buried.
•
The screw heads should not be flush to the wall.
•
Certain types of wall may require plugs to be anchored in the wall before the screws are inserted.
Document Version 2012-11
•
The charge indicator will turn off when the battery is fully charged. For
more information about charging the battery, see "Battery Information
(Page 12)".
•
It is normal for the handset and charger to feel warm while the battery
is charging.
•
Keep devices sensitive to magnetic fields away from the charger.
•
Use only the included charger.
Install the two screws in the wall, spacing them 25 mm apart.
25 mm
Screws
(Not supplied)
Mount the charger securely on the wall.
20 mm or longer
• Recommended screw size is
M4 x 20.
Installation and Setup
Space
(2 mm)
Operating Instructions 55