Using A Bluetooth Headset (Optional) - Panasonic KX-TGF675 Quick Manual

Using a Bluetooth headset
(optional)
By pairing a Bluetooth headset to the base
unit, you can enjoy hands-free conversations
when talking on landline calls.
R Only 1 Bluetooth device can be used with
*1
the unit at a time .
*1 You cannot use a Bluetooth headset to
talk on a cellular line.
Pairing a Bluetooth headset to
the base unit
1
Bluetooth headset:
Set your headset to pairing mode.
R Refer to the headset's operating
instructions.
2
Handset:
MMENUN#621
3
If your headset PIN is "0000", go to
step 4.
If your headset PIN is not "0000",
press MCLEARN, then enter your
headset's PIN.
R Typically, default PIN is "0000". Refer
to the headset's operating instructions.
4
Press MOKN, then wait until a long beep
sounds.
5
MOFFN
R When is displayed on the base
unit, the headset is available for use.
Operating a Bluetooth headset
using a landline
Important:
R Refer to your headset's operating
instructions for details.
Answering landline calls with your
headset
To answer a landline call, press your
headset's button referring to your headset's
operating instructions.
For assistance, please visit http://shop.panasonic.com/support
TGF675(en)_QG_0408_ver001 (ZA).pdf 17
Getting Started
When you finish talking, press your headset's
button referring to your headset's operating
instructions.
Note:
R If you cannot hang up the call using your
headset, press MZN on the base unit 2
times.
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone.
– during an intercom call between the base
unit and handset.
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Press M N on the base unit.
n To switch to the base unit:
Press MZN on the base unit.
17
11-Apr-19 10:29:41 AM