Registering And Deregistering A Cell Phone For Phonebook Transfer - Panasonic KX-UDT131 Operating Instructions Manual

Note
•
When a call is received, if the headset ringer is
on, the Bluetooth headset will ring even if the
handset is set to Silent Mode, or if "Vibrate"
or "Ring On Charger" is enabled.
Switching a Conversation between
the Handset and a Bluetooth
Headset
To switch a conversation from the handset to
the Bluetooth headset
•
Press twice.
To switch a conversation from the Bluetooth
headset to the handset
•
Press .
Adjusting the Microphone Volume of
a Bluetooth Headset
1.
Press or the [CENTRE] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Bluetooth Option",
and then press
4.
Press [ ] or [ ] to select "BT Headset", and then
press .
5.
Press [ ] or [ ] to select "Headset Mic Vol",
and then press
6.
Press [ ] or [ ] to adjust the volume (Level 1–6),
and then press
Note
•
The microphone volume for the Bluetooth
headset can only be adjusted when the handset
is in standby mode.
Registering and Deregistering a
Cell Phone for Phonebook
Transfer
You can transfer the phonebook data of a cell phone to
the handset. Before performing the transfer, you must
register the cell phone to the handset. For details about
Document Version 2012-11
.
.
.
.
transferring a phonebook, see "Phonebook and vCard
Transfer by Bluetooth (Page 38)".
Registering a Cell Phone
1.
Press or the [CENTRE] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Bluetooth Option",
and then press
4.
Press [ ] or [ ] to select "Cell Phone", and then
press .
5.
Press [ ] or [ ] to select "Registration", and
then press .
6.
If the "Register/Deregister" menu is displayed,
press [ ] or [ ] to select "Register", and then
press . Otherwise, proceed to step 7.
7.
Complete the registration by operating the cell
phone.
Note
•
Follow the procedure above before doing any
operations on the cell phone. Otherwise, the cell
phone may not be registered.
•
When you operate the cell phone, the
handset's Bluetooth PIN number is required.
For details, see "Setting and Changing the
Bluetooth PIN Number (Page 33)".
Deregistering a Cell Phone
1.
Press or the [CENTRE] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Bluetooth Option",
and then press
4.
Press [ ] or [ ] to select "Cell Phone", and then
press .
5.
Press [ ] or [ ] to select "Registration", and
then press .
6.
Press [ ] or [ ] to select "Deregister", and then
press .
7.
Press [ ] or [ ] to select "Yes", and then press
.
Feature Operations
.
.
.
.
Operating Instructions 35