Customising the Telephone
Entering Characters
You can enter characters and digits using the dial keys.
You can select one of 5 character modes by pressing the Right Soft Key while entering
a name. The function icon above the soft key displays the current character mode.
For a list of available characters, see "Character Mode Table (Page 43)".
To change the character mode while editing a name in the phonebook, press the right soft key.
Latin
Example: To enter "Anne" in Latin Mode.
(RIGHT)
•
To switch between uppercase and lowercase, press
•
To enter a character located on the same dialling key as the previous character, move the cursor by
pressing the Navigator Key [ ], then enter the desired character.
•
If you enter a different character by mistake, press the Navigator Key [ ] or [ ] to highlight the character,
press
to delete it, and then enter the correct character.
•
To clear an entire line, press
•
To move the cursor, press the Navigator Key [ ], [ ], [ ] or [ ].
42
Operating Instructions
Numeric
Greek
(RIGHT)
for more than 1 second.
Extended 1
Extended 2
(RIGHT)
.
A, a
B, b
C, c
Document Version 2012-11