2.
Dial the party you want to transfer to, and then press
.
*1
A blind transfer is not available if the CS is connected to a
KX-NS1000 PBX.
Three-party Conference
During a conversation, you can add an additional party
to your call and establish a conference call.
Notice
•
If the CS is connected to a KX-NS1000 PBX,
refer to the documentation for the PBX.
•
Your phone system may support advanced
conference features, such as conference calls
with four or more parties. In this case, the
procedures for handling a conference call may
be different from those explained in this section.
For details about your phone system, consult
your administrator or dealer.
Making a Conference Call
1.
FUNC
Press
, and then press 5 ("Conference").
2.
Dial the party you want to add to the conversation,
and then press
3.
After the called party answers, press
then press 5 ("Conference").
Note
•
The
soft key can also be used to access
the Conference function directly. To display this
key, edit the displayed soft keys. For details,
see "Key Option (Page 49)".
Removing a Party from the Conference
During a conference, you can remove other parties from
the conference. However, this operation is available
only during conference calls you initiate.
1.
During a conference call, press
2.
Press
.
3.
Press the dial key, or press [ ] or [ ], and then
press
to select the DN key (flexible key) that
corresponds to the party you want to disconnect.
4.
Press
.
5.
Press
.
6.
Press the dial key, or press [ ] or [ ], and then
press
to select the DN key (flexible key) that
corresponds to the remaining party.
Document Version 2012-11
.
FUNC
, and
.
Note
•
To reestablish the conference without removing
either party, press
("Conference") after step 3.
Ending a Conference Call
To go on-hook and end the conference call, press
.
Feature Operations
FUNC
, and then 5
Operating Instructions
31