Installation And Setup; Battery Installation; Charger Connection - Panasonic KX-UDT131 Operating Instructions Manual

Installation and Setup

Installation and Setup

Battery Installation

Open the battery cover, insert the battery, and close the cover as indicated below.
•
Confirm that the slide switch has been returned to its original position when the cover is closed.

Charger Connection

Connect the AC adaptor to the charger.
•
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become
disconnected.
•
Fasten the AC adaptor cord to the cord holder.
•
Use only the included Panasonic AC adaptor. For details, see "Accessory Information (Page 14)".
WARNING
•
To reduce the risk of fire or electric shock, do not overload AC outlets and extension cords.
•
Do not bundle the charger's AC adaptor cord with the power cords of machines located nearby.
•
Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric
shock and/or excessive heat resulting in a fire.
•
Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet,
then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc.
resulting in a fire.
54 Operating Instructions
Hooks
To AC Outlet
Document Version 2012-11