Page 1
KX-UDT121 Model No. Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. Please use only the battery provided and charge the battery for about 3 hours before using the handset for the first time.
Page 2
Describes information about the programming and maintenance of the SIP Cell Station Unit (CS). Installation Guide Briefly describes basic information about the installation of the SIP Cell Station Unit (CS). Manuals and supporting information are provided on the Panasonic Web site at: http://panasonic.net/pcc/support/sipphone Note •...
Page 3
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ® Panasonic Corporation is under licence. • Jabra is a registered trademark of GN Netcom A/S. • Plantronics is a registered trademark of Plantronics, Inc.
Table of Contents Table of Contents Important Information ................6 For Your Safety .........................6 Data Security ........................8 Additional Information ......................9 Important Safety Instructions ....................9 For Best Performance ....................11 Battery Information ......................12 Before Operating the Telephone ............14 Accessory Information ....................14 Location of Controls .......................15 Handset Functions ......................17 Setting the Password .....................17 Key Lock .........................17...
Page 5
Table of Contents Registering and Deregistering the Bluetooth Headset ..........33 Connecting and Disconnecting a Bluetooth Headset ..........34 Call Handling with a Bluetooth Headset ..............34 Registering and Deregistering a Cell Phone for Phonebook Transfer ......35 Customising the Telephone ..............36 Using the Handset Phonebook ..................36 Private Ring ........................36 Storing an Item in the Handset Phonebook ..............36 Locking the Handset Phonebook ...................38...
Important Information Important Information WARNING For Your Safety General Safety For safety reasons, do not physically modify To reduce the risk of injury, loss of life, electric shock, the product or any optional equipment. fire, malfunction, and damage to equipment or property, always observe the following safety precautions.
Page 7
Important Information Consult the manufacturer of any personal The AC adaptor is used as the main medical devices, such as pacemakers, to disconnect device. Ensure that the AC outlet determine if they are adequately shielded is installed near the product and is easily from external RF (radio frequency) energy.
Important Information Data Security • To avoid unauthorised access to this product: – Keep the password (e.g., PIN for registration) secret. – Change the default password. – Set a password that is random and cannot be easily guessed. – Change the password regularly. •...
Important Information Information for Users on Collection Additional Information and Disposal of Old Equipment and used Batteries Important Safety Instructions These symbols on the products, packaging, and/or accompanying When using your telephone equipment, basic safety documents mean that used precautions, including those below, should always be electrical and electronic products followed to reduce the risk of fire, electric shock and and batteries should not be mixed...
Page 10
1880 MHz to 1900 MHz. The usage of this device is generally allowed in all EU countries. Panasonic System Networks Co., Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/...
Important Information and installers using this technology for calls to or For Best Performance from the PSTN refer to ITU E Model requirements in the design of their networks. The overall aim is to Operating Range minimise delay, distortion and other transmission •...
Important Information Placement Battery Information • Do not place heavy objects on top of the handset After your Panasonic battery is fully charged (at 25 °C): and charger. • Care should be taken so that objects do not fall onto, Operation Operating Time and liquids are not spilled into, the product.
Page 13
When the low battery warning is displayed, charge the battery for about 3 hours. The battery strength icon will then display the correct reading. • Please use only Panasonic batteries. For details, consult your administrator or dealer. • There is a danger of explosion if the battery is incorrectly replaced.
Before Operating the Telephone Before Operating the Telephone Accessory Information Included Accessories AC adaptor: 1 Model No. Part No. KX-UDT121CE PNLV226CE KX-UDT121RU KX-UDT121UK PNLV226E KX-UDT121AL PNLV226AL Charger: 1 Battery Battery Cover Belt Clip: 1 Belt Clip Holder: 1 For details, consult your administrator or dealer.
A Ringer/Charge Indicator B Headset Jack The following headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.) – Wired headsets Panasonic RP-TCA400 and RP-TCA430 – Bluetooth headsets Selected Plantronics -brand headsets ® Selected GN Netcom Jabra -brand headsets ®...
Page 16
Before Operating the Telephone B UP ( ) ® Used to adjust the ringer volume. C RIGHT ( ) ® Used to open the phonebook. D DOWN ( ) ® Used to display the Outgoing call log. E CENTRE ® Used to display the Menu. In this manual, when a procedure instructs you to "press ", you can also press the [CENTRE] key to confirm the selection.
Before Operating the Telephone To unlock Handset Functions To unlock the handset keys, press and hold the [CENTRE] navigation key for more than 2 seconds. Setting the Password icon will change to to indicate the keys have been unlocked. The handset password is not set by default. You must Note register a handset password (4 digits) before use.
Before Operating the Telephone Noise Reduction When Noise Reduction is enabled, environmental noise is reduced to improve and maintain sound quality for the other party in the conversation. Receiver volume is also increased according to the level of environmental noise. It is useful in noisy environments such as warehouses, manufacturing plants, restaurants, and garages.
Before Operating the Telephone Display Silent Mode (See page 17) Auto Answer (See page 24) Microphone Mute Call Forwarding (See page 32) Do Not Disturb (See page 32) Time Display Date/Incoming Call Log Status/New Messages/ Phonebook Error New Incoming Call Record Handset’s Phone Number and Name Pictograph To change the display of the handset’s phone...
Before Operating the Telephone Soft Keys Icons and information shown on the display will vary depending on the context. To select an item shown on the display, press the corresponding soft key. Opens the phonebook. Used to save a setting. Pressing this key for more than 2 seconds locks the phonebook.
Before Operating the Telephone Displayed when in Special character Used to select an item when in setting mode. (Extended 1) entry mode. Pressing this key switches to Special character (Extended 2) character entry mode. Used to set Call Forwarding and Do Not Disconnects the current call and allows you Disturb.
Before Operating the Telephone Flexible Keys A Flexible Key can be used either to seize a line in order to make or receive a call, or used as a function key. Press to display the Flexible Key list. Here you can access the 12 Flexible Keys.
Before Operating the Telephone Basic Operations Operation Outline Handset functions are accessed through the display menu and selected with the Navigator Key and soft keys. [Incoming Call Log] [Ringer Volume] Press the Press the Navigator Key Navigator Key [Flexible Keys] [In standby mode] [Function Keys] [Handset Phonebook]...
Before Operating the Telephone Function Menus Function Keys Handset functions can be activated through the display Press or the [CENTRE] navigation key to display key list. the main and sub menus. FUNC Press to display the function key list. Main Menu—While in Standby Mode Press [ ] or [ ] to select the desired function, and Incoming Log then press...
Before Operating the Telephone Adjusting the Ringer Volume or Selecting the Display Language Turning the Ringer Off You can select the language displayed on your handset. Press or the [CENTRE] navigation key. Press or the [CENTRE] navigation key. Select " Ringer Volume"...
Before Operating the Telephone Press [ ] or [ ] to select the desired setting (Vib.& Ring, Vib.® Ring, Off), and then press Note • To set Vibrate only, without ringing, select "Vib.& Ring" and set the Ringer Volume to "Off", or turn Silent Mode on.
Feature Operations Feature Operations Using the Phonebook Press [ ] or Select an item stored in the phonebook, and then Making Calls press To end the call, press Calling Note • For details about searching for an item in the Calling by Dialling phonebook, see "Searching for an Item in the Phonebook (Page 28)".
Feature Operations • • For details about assigning Hot Keys, see While an item is displayed you can press "Assigning Hot Keys (Page 40)". to return to the "<Enter Name>" display, and then search for another item. Searching for an Item in the Phonebook You can search for an item in the phonebook, and then make a call.
Feature Operations Rejecting an incoming call Receiving Calls You can reject an incoming call from your handset. While an incoming call is ringing, press Receiving The call will be rejected, and the handset will return to standby mode. To answer an incoming call, press Rejecting calls from specific numbers Note Calls from specific numbers can be automatically...
Feature Operations Note During a Conversation • The soft key to reject an incoming call is not displayed on the handset if the CS is connected to a KX-NS1000 PBX. Holding a Call You can put a call on hold by holding the call at your extension.
Feature Operations Note Dial the party you want to transfer to, and then press • To reestablish the conference without removing FUNC A blind transfer is not available if the CS is connected to a either party, press , and then 5 KX-NS1000 PBX.
Feature Operations Useful Features Call Waiting During a conversation, if a second call arrives, you will hear a call waiting tone. You can answer the second call Call Forwarding/Do Not Disturb by disconnecting or holding the current call. You can have incoming calls automatically forwarded To disconnect the current call and then talk to to another destination.
Feature Operations Registering a Bluetooth Headset Select " Setting Handset" by pressing the arrow keys, and then press Notice Press [ ] or [ ] to select "Bluetooth Option", • Perform any procedures on the headset and then press necessary for registering it before configuring the settings on the handset.
Feature Operations Deregistering the Bluetooth Headset Press [ ] or [ ] to select "Bluetooth Option", and then press Press or the [CENTRE] navigation key. Press [ ] or [ ] to select "BT Headset", and then Select " Setting Handset" by pressing the press arrow keys, and then press Press [ ] or [ ] to select "Connection", and then...
Feature Operations Switching a Conversation between Select " Setting Handset" by pressing the the Handset and a Bluetooth arrow keys, and then press Headset Press [ ] or [ ] to select "Bluetooth Option", and then press To switch a conversation from the handset to Press [ ] or [ ] to select "Cell Phone", and then the Bluetooth headset press...
Customising the Telephone Customising the Storing an Item in the Handset Phonebook Telephone Storing a New Item Using the Handset Press or the [CENTRE] navigation key. Select " New Phonebook" by pressing the Phonebook arrow keys, and then press Enter a name (max. 24 characters), and then press You can store up to 500 phone numbers in the handset along with names for easy access.
Page 37
Customising the Telephone • Steps 9 and 10 can be omitted if you do not want Press to open the phonebook sub-menu. to assign a default number. (The first number Press [ ] or [ ] to select "Edit", and then press entered for an entry will automatically be assigned as the default number.) Edit the name, phone number, category, and...
Customising the Telephone Editing Category Names Phonebook and vCard Transfer You can edit the names of the categories in the by Bluetooth phonebook. Transferring Phonebook Data from a Press or the [CENTRE] navigation key. Cell Phone using Bluetooth Select " Setting Handset"...
Page 39
Customising the Telephone • Phonebook names can contain up to 24 Press characters. Names over 24 characters in length Press [ ] or [ ] to select "2:Other Cell", and will be shortened to 24 characters when then press transferred. Note that if extended characters When "Transfer Phonebook From Cell are used, the length of the name transferred Phone"...
Customising the Telephone Assigning Hot Keys Memo Alarm Setting You can assign a phone number stored in the An alarm will sound at the set time. A memo can also phonebook to a key to be used as a Hot Key. be displayed.
Page 41
Customising the Telephone Enter a time of day using the Navigator Keys and/or dial keys, and then press Enter a text message to be displayed when the Memo Alarm occurs, and then press Press Note • For details about entering characters, see "Entering Characters (Page 42)".
Customising the Telephone Entering Characters You can enter characters and digits using the dial keys. A, a B, b You can select one of 5 character modes by pressing the Right Soft Key while entering C, c a name. The function icon above the soft key displays the current character mode. For a list of available characters, see "Character Mode Table (Page 43)".
Customising the Telephone Character Mode Table 0–9 ΑΒΓ AÄÅ SŚŠ Keys (Latin) (Numeric) (Greek) (Extended 1) (Extended 2) τ υ φ 8 • Press before or after entering a character to change between uppercase and lowercase. • Pressing a key repeatedly will cycle through the characters associated with that key. For example, to enter the letter "C"...
Customising the Telephone Note Deleting Stored Items • In step 3, you can select "Delete All" instead to delete all items. Phonebook Press [ ] or to display the phonebook. Press [ ] or [ ] to select an item, or press to search for an item.
Customising the Telephone Changing Handset Settings Handset Setting Menu Layout [Main Item] [Sub Item] Setting Handset Incoming Option Ringer Volume Ringer Type Vibrate Ring On Charger Memo Alarm Power Save Headset Ringer Talk Option Speaker Volume Receiver Volume Headset Volume Headset Mic Vol Talk On Charger Answer Option...
Page 46
Customising the Telephone Tone Option Key Tone Range Alarm System Option Register H/S Cancel Base Select Base System Lock Change PIN H/S Information CS Version Firmware Update Enable CS Web Bluetooth Option On/Off Cell Phone BT Headset Other Option Change Password Reset Handset MasterCS Address These settings are made available through Web user interface programming.
Page 47
Customising the Telephone Sub Item Description Setting Default Ringer Type Ringer Pattern Ringtone 1–19, – Default Selects the ringtone for each type of 25–32 Ringtone 1 call. – Private Ring LED Pattern (Category 1– Selects the LED pattern for each type Green of call.
Page 48
Customising the Telephone Sub Item Description Setting Default Power Save Power Save Time Selects the number of seconds before automatically turning off the Power 0–60 s Save Items below when receiving a call. Power Save Item Ringer&Vibrate Not selected Selects the items to turn off. Backlight Headset Selects whether a tone is heard from...
Page 49
Customising the Telephone Key Option Sub Item Description Setting Default Soft Key Edits the soft keys. Default Edit – Standby Flexible Key – Softkey A – Talking Not stored Function Key – Softkey B – Softkey C Hot Key Dial Soft Key Edits the names of the soft keys.
Page 50
Customising the Telephone Display Option Sub Item Description Setting Default Language Selects the display language. Deutsch English Español FRANÇAIS Italiano Dansk Nederlands Svenska English ΕΛΛΗΝΙΚΑ Magyar Português Polski slovensky Čeština Hrvatski Backlight Turns on the backlight of the LCD and keypad.
Page 51
Customising the Telephone Sub Item Description Setting Default Caller ID Selects which caller information is H/S Phonebook Disp displayed when a call is received. PBX Setting Either the information stored in the PBX Setting handset’s phonebook or the phone system can be displayed. Colour Selects the colour scheme of the LCD.
Page 52
Customising the Telephone Sub Item Description Setting Default CS Version Displays the firmware version and the IPL (Initial Program Loader) number of — — the CS that the handset is registered to. Only registered bases are shown. You can select multiple bases simultaneously. Password is required (4 digits).
Page 53
Customising the Telephone Sub Item Description Setting Default Reset Returns the handset settings to its Enter Password. Handset default settings. (4 digits) ¯ Select the desired Not selected item(s). ¯ Press MasterCS Displays the IP address of the Master Address —...
• Fasten the AC adaptor cord to the cord holder. • Use only the included Panasonic AC adaptor. For details, see "Accessory Information (Page 14)". WARNING • To reduce the risk of fire or electric shock, do not overload AC outlets and extension cords.
Installation and Setup Charging the Battery At the time of shipment, the battery is not charged. Please charge the battery for about 3 hours before using the handset for the first time. • The charge indicator will turn off when the battery is fully charged. For more information about charging the battery, see "Battery Information (Page 12)".
Installation and Setup Attaching the Belt Clip You can attach the handset to your belt by following the steps below. [To attach] Insert the clip into the designated notches in the handset. Slide the clip into the holder until it clicks. [To remove] Make sure to turn the handset 180°...
Appendix Appendix Specifications Item Specifications Display 1.8-inch TFT Backlight LCD, 65,000 colours Headset Jack 1 (ø 2.5 mm) Battery Li-Ion 3.7 V (700 mAh) Maximum Power Consumption Standby: 0.3 W (Charger) Maximum: 4.0 W Talk: up to 13 hours Battery Performance Standby: up to 200 hours Charging Time 3 hours...
Appendix Troubleshooting Problem Possible Cause Solution The handset does not The battery is drained. Charge the battery fully. work. For details, see "Charging the Battery (Page 55)". The power is off. • Turn it on. For details, see "Location of Controls (Page 15)".
Page 59
Appendix Problem Possible Cause Solution You cannot use the The handset will not function handset during a during a power failure because the — power failure. CS stops emitting radio waves. The headset does not The headset ringer cannot be •...
Page 60
Appendix Problem Possible Cause Solution While charging the The battery is not charging Unplug the AC adaptor from the AC battery, the LED correctly due to an electrical outlet, remove the battery from the indicator blinks failure. handset, and consult your dealer. rapidly and the handset beeps rapidly.
Page 61
Appendix Problem Possible Cause Solution I cannot connect a The Bluetooth headset or the • Confirm that the Bluetooth Bluetooth headset to Bluetooth function of the handset headset is turned on. the handset. is off. • Confirm that the Bluetooth setting of the handset is turned on.
Appendix Error Messages Error Message Possible Cause Solution Register Unit The handset has been cancelled or Consult your dealer. the handset has not been registered. No Service The handset is out of range. Move closer to the CS. The CS is turned off. Make sure the power cord is connected.
Page 63
Appendix Error Message Possible Cause Solution Phonebook Error There was a wireless transmission • Remove unnecessary data in the error, corrupted data, or the phonebook, or consult your memory became full during a administrator regarding the phonebook download. number of items being downloaded.
Index Index Assigning Deleting Dialling AC adaptor Key Lock Accessories Lock Battery Keys Charging Phonebook Installation Battery information Belt clip Attaching Memo Alarm Belt clip holder Bluetooth Noise Reduction Call Forwarding Call Log Deleting One-touch Dialling Making a call Operation outline Storing to phonebook Call Waiting Caller ID...
Page 65
Index Text, entering Three-party conference Transferring a call Vibrate Voice Mail Volume Receiver/Speaker/Headset Ringer Document Version 2012-11 Operating Instructions...