Assigning Hot Keys; Memo Alarm Setting - Panasonic KX-UDT131 Operating Instructions Manual

Customising the Telephone

Assigning Hot Keys

You can assign a phone number stored in the
phonebook to a key to be used as a Hot Key.
1.
In standby mode, press and hold a dial key (0–9) for
more than 1 second.
2.
Press .
3.
Press [ ] or [ ] to select "Copy from P.book",
and then press
4.
Press [ ] or [ ] to select an entry, or press
to search for an entry, and then press
5.
Press [ ] or [ ] to select a number, and then press
.
6.
Press .
Note
•
For details about searching for an item in the
phonebook, see "Searching for an Item in the
Phonebook (Page 28)".
Selecting the Type of Hot Key
Dialling
You can select one of 2 types of Hot Key Dialling for
each assigned Hot Key.
1.
In standby mode, press and hold a dial key (0–9) for
more than 1 second.
2.
Press .
3.
Press [ ] or [ ] to select "Automatic Call", and
then press .
4.
Select "Manual" or "Auto", and then press
•
Manual: Pressing and holding an assigned Hot Key
for the set number of seconds will display the Hot
Key's information. Then, press
Key's assigned number. Alternately, when the Hot
Key's information is displayed, you can press
and select a DN key to dial using the line
assigned to the DN key.
•
Auto: Pressing and holding an assigned Hot Key
for the set number of seconds will dial that Hot
Key's assigned number immediately.
Note
•
To select the number of seconds before the
call is automatically made, see "Key Option
(Page 49)".
40 Operating Instructions
.
to dial the Hot

Memo Alarm Setting

An alarm will sound at the set time. A memo can also
be displayed. Memo Alarm is available only when the
handset is within range of a CS.
Note
•
You can select the ringer pattern and LED
pattern for each Memo Alarm. For details, see
"Incoming Option (Page 46)".
•
If you are on a call at the time that the alarm is
set to sound, it will sound after you have ended
.
the call.
Setting a Memo Alarm
1.
Press
2.
Select "
keys, and then press
3.
Press [ ] or [ ] to select an alarm number (1–3),
and then press
4.
Press [ ] or [ ] to select an alarm mode, and then
press
The alarm modes are as follows:
–
Off: Disables the selected Memo Alarm.
–
Once: The selected Memo Alarm will occur only
once.
–
Daily: The selected Memo Alarm will occur at
the same time every day.
–
Weekly: The selected Memo Alarm will occur
at the same time on selected days of the week.
5.
Set the time and date for the Memo Alarm.
.
The information to enter depends on the alarm
mode.
–
Once: Enter the date and time, using the
Navigator Keys and/or dial keys, and then press
–
Daily: Enter the daily time, using the Navigator
Keys and/or dial keys, and then press
–
Weekly:
a.
Press [ ] or [ ] to select a day of the week,
and then press
displayed next to each day of the week that
has been selected. In this way, you can
select multiple days of the week.
b.
After selecting 1 or more days of the week,
press
or the [CENTRE] navigation key.
Memo Alarm" by pressing the arrow
.
.
.
.
. A
.
Document Version 2012-11
.
mark will be