Dhcpv6 Server Setup; Http Generic Setup - Avaya one-X 9600 Series Administrator's Manual

Server Administration

DHCPv6 Server Setup

!
Important:
IPv6 operation is limited to a specific customer set and is not for general use.
Important:
DHCPv6 server setup involves:
1. Installing the DHCP server software according to vendor instructions.
2. Configuring the DHCP server to send a Vendor-Specific Information (VSI) option with an
enterprise number of 6889 (the Avaya Enterprise Number).
3. Within that Vendor-Specific Information option, include a vendor-specific option with an
opt-code of 242.
4. Set the option-data portion of the vendor-specific option with any or all of the applicable
parameters listed in the bullet list that precedes this section for the DHCP site-specific
option. Additionally, the following parameters that can be set in other numbered options by
DHCP can also be set in the Avaya DHCPv6 vendor-specific option: DOMAIN and
DNSSRVR.
Since the vendor-specific option is processed after the DHCP fields and standard options, any
values set via the VSI will supersede any values set via DHCP fields or standard options, as
well as any other previously set values.

HTTP Generic Setup

You can store the same application software, script file, and settings file on an HTTP server as
you can on a TFTP server. TFTP is not supported for 9600 Series IP Deskphones. With proper
administration, the telephone seeks out and uses that material. Some functionality might be lost
by a reset if the HTTP server is unavailable. For more information, see
Servers on page 55.
!
CAUTION:
The files defined by HTTP server configuration must be accessible from all IP
CAUTION:
Deskphones invoking those files. Ensure that the file names match the names in
the upgrade script, including case, since UNIX systems are case-sensitive.
Note:
Use any HTTP application you want. Commonly used HTTP applications include
Note:
Apache
62 9600 Series IP Deskphone Administrator Guide Release 6.0
® ®
and Microsoft IIS™.
DHCP and File