Language Selection - Avaya one-X 9600 Series Administrator's Manual

Language Selection

9600 Series IP Deskphones are factory-set to display information in the English language. As of
Release 1.1, all software downloads include language files for 13 additional languages.
Software Release 1.2 added support for a large font version of English only and Release 1.5
added Arabic to the language file download. Administrators can specify from one to four
languages per telephone to replace English. End users can then select which of those
languages they want their telephone to display.
All downloadable language files contain all the information needed for the telephone to present
the language as part of the user interface. For the 9670G IP Telephone, this includes an
indication of the character to be used as a decimal "point" in numeric values and an indication of
the character, if any, to be used as a separator (thousands, millions, etc.) in numeric values (no
character or a space character must be usable as well as punctuation characters).
There are no dependencies between the languages available from the software download and
the actual character input method. If a character input method is not supported, ASCII is used
instead. Acceptable input methods are as follows:
ASCII
●
Latin-1
●
German
●
French
●
Italian
●
Spanish
●
Portuguese
●
Russian
●
Albanian, Azeri, Turkish
●
Use the configuration file and these parameters to customize the settings for up to four
languages:
LANGxFILE - The name of a selected language file, for example, "French". In addition to
●
providing the language name as this value, replace the "x" in this parameter with a "1", "2",
"3", or "4" to indicate which of four languages you are specifying. For example, to indicate
German and French are the available languages, the setting is:
LANG1FILE=mlf_german.txt and LANG2FILE=mlf_french.txt.
LANG0STAT - Allows the user to select the built-in English language when other
●
languages are downloaded. If LANG0STAT is "0" and at least one language is
downloaded, the user cannot select the built-in English language. If LANG0STAT is "1" the
user can select the built-in English language text strings.
LANGSYS - The file name of the system default language file, if any.
●
LANGLARGEFONT - The name of the language file you want available for a "large font"
●
display, currently only "English."
As of Release 1.2, a large text font is available for user selection on all 9600 Series IP
Telephones but the 9610. The larger text font can only be activated if a language file for this font
Croatian, Slovenian
●
Czech, Slovak
●
Estonian
●
Hungarian
●
Latvian
●
Lithuanian
●
Polish
●
Romanian
●
Language Selection
Issue 8 August 2010 113