Avaya one-X 9600 Series Administrator's Manual page 95

Table 12: 9600 Series IP Telephone Customizable System Parameters (continued)
Parameter Name
SCEPPASSWORD
SCREENSAVER
SCREENSAVERON
SIG
SNMPADD
SNMPSTRING
Administering Options for the 9600 Series IP Telephones
Default Value Description and Value Range
"$SERIALNO" Specifies a challenge password for SCEP. Zero to 32
ASCII characters
" " (Null) Filename for a custom screen saver. 0 to 32 ASCII
characters. Note that screen saver files must be in .jpg
format. Acceptable characters for use in filenames are:
0 through 9
A through Z
a through z
- (dash)
. (period)
_ (underscore)
240 Number of idle time minutes after which the screen
saver is turned on. The default is 240 minutes (4
hours). Valid values range from zero (disabled) to 999
minutes (16.65 hours). For 9670G phones, use
HOMEIDLETIME
0 Signaling protocol download flag. Valid values are:
0 = Default. For software releases prior to 6.0, Default
means the default protocol as determined by the
96xxupgrade.txt file (a custom upgrade file is required
to support both protocols). For software releases 6.0
and later, Default means to download the upgrade file
for the same protocol that is supported by the software
that the telephone is currently using.
1 = Use H.323 protocol
2 = Use SIP protocol
" " (Null) Text string containing zero or more allowable source IP
Addresses for SNMP queries, in dotted decimal or
DNS format, separated by commas, with up to 255
total ASCII characters including commas.
Note that as of Avaya Communication Manager
Release 4.0, SNMP addresses can also be
administered on the system-parameters IP-options
form.
" " (Null) Text string containing the SNMP community name
string (up to 32 ASCII characters, no spaces).
Note that as of Avaya Communication Manager
Release 4.0, the SNMP community string can also be
administered on the system-parameters IP-options
form.
instead.
Issue 8 August 2010
14 of 18
95