Dhcp Generic Setup - Avaya one-X 9600 Series Administrator's Manual

Server Administration
Table 8: Parameters Set by DHCP in a Site-Specific Option (continued)
Parameter
SIG
SNMPADD
SNMPSTRING
STATIC
TLSDIR
TLSPORT
TLSSRVR
TLSSRVRID
UNNAMEDSTAT
VLANTEST
The parameters in
the DHCP server is not available for any reason during telephone restart or reboot, the
telephone uses these saved parameters.

DHCP Generic Setup

This document is limited to describing generic DCHPv4 and DHCPv6 administration that works
with the 9600 Series IP Deskphones. Several DHCP software alternatives are common to
Windows operating systems including:
Windows NT
●
Windows 2000
●
Windows 2003
●
Any other DHCP application might work. It is the responsibility of the customer to install and
configure the DHCP server correctly.
58 9600 Series IP Deskphone Administrator Guide Release 6.0
Description
The signaling protocol download flag that indicates which protocol applies (H.323
(1), SIP, (2) or Default (0). For software releases prior to 6.0, SIG can only be set
manually on the telephone (not via DHCP or in the 46xxsettings.txt file), and Default
means the default protocol supported at that location (a custom upgrade file is
required to support both protocols). For software releases 6.0 and later, separate
upgrade files with different names are used for H.323 and SIP, and Default means to
download the upgrade file for the same protocol that is supported by the software
that the telephone is currently using.
Allowable source IP Address(es) for SNMP queries. The default is " " (Null).
SNMP community name string. The default is " " (Null).
Controls whether to use a manually-programmed file server or CM IP Address
instead of those received via DHCP or a settings file. If a manually-programmed file
server IP Address is to be used, STATIC must be set via DHCP.
Specifies the path name prepended to all file names used in HTTPS GET operations
during startup.
Specifies the TCP port number used for HTTPS file downloading.
IP Address(es) or DNS name(s) of Avaya file server(s) used to download
configuration files.
Note: Transport Layer Security is used to authenticate the server.
Controls whether the identity of a TLS server is checked against its certificate.
Specifies whether the telephone will attempt unnamed registration.
Controls the length of time the telephone tries DHCP with a non-zero VLAN ID.
When the interval is exceeded, the telephone records the VLAN ID so that it is not
used again, and DHCP continues on the default VLAN. The default is 60 seconds.
Table 8 are saved in a 9600 Series IP Telephone's non-volatile memory. If
®
4.0 DHCP Server
®
DHCP Server
®
DHCP Server