Avaya one-X 9600 Series Administrator's Manual page 138

Administering Applications and Options
Table 19: 9600 Series IP Telephone Customizable System Parameters
Parameter Name
General User Parameters:
APPSTAT
OPSTAT
OPSTAT2
138 9600 Series IP Deskphone Administrator Guide Release 6.0
Default Value Status
1 Optional
111 Optional
0
Description and Value Range
Applications status flag. See
The Application Status Flag
(APPSTAT) on page 144 for a
description. See Table 20
range of values.
Options status flag(s) (1 or 3 ASCII
numeric digits) indicate which
options are user-selectable. The
default of 111 grants access to all
options and related applications.
Single digit valid values are:
1=user can access all options,
including Logout,
2= user can access only
view-oriented applications.
Three-digit valid values are a
concatenation of binary values, in
the form abc, where each letter
represents a 0 (disabled/off) or 1
(enabled/on), interpreted as:
a = base settings for all user options
and related applications, except as
noted in b or c.
b = setting for view-oriented
applications (for example, the
Network Information application), as
applicable.
c = setting for Logout application, if
applicable.
The binary "0" does not allow an end
user to see or invoke options and
related applications. The binary "1"
allows full display and access to all
options and related applications.
OPSTAT override flag. If set to 0,
OPSTAT is not affected. If set to 1,
OPSTAT is unaffected with the
exception that any changes to
customized labels in the backup file
are uploaded and used as if
OPSTAT permitted this action.
for the
1 of 7