Avaya one-X 9600 Series Administrator's Manual page 31

Table 5: Received Packets (Destination = 9600 Series IP Telephone) (continued)
Destination Port
The number used in the
Source Port field of RAS
packets sent by the phone
As specified by CM, or as
reserved for CNA RTP tests
during CNA registration
The next higher port number if
the port used for RTP is even,
or the next lower port number
if the port used for RTP is odd.
Table 6: Transmitted Packets (Source = 9600 Series IP Telephone)
Destination Port
7
53
67
Release 2.0+ = HTTPPORT
Pre-Release 2.0 = 80 unless
explicitly specified otherwise
(i.e. use of Port 81 for CM)
80 unless explicitly specified
otherwise (e.g., in a URL or
due to use of WMLPORT)
The number used in the
Source Port field of the SNMP
query packet received by the
telephone
The number used in the
Source Port field of packets
received by the telephone's
HTTP server
Source Port
1719 H.323 RAS messages
Any Received RTP and SRTP
packets
Any Received RTCP and
SRTCP packets
Source Port
Any unused Transmitted Qtest messages
port number
Any unused Transmitted DNS messages
port number
68 Transmitted DHCP
Any unused Packets transmitted by the
port number telephone's HTTP client
Any unused Packets transmitted by the
port number telephone's HTTP client
after startup (for example,
for backup/restore or push)
161 Transmitted SNMP
Release Packets transmitted by the
2.0+ = telephone's HTTP server
PUSHPORT
Pre-Release
2.0 = 80
Other Network Considerations
Use
Use
messages
during startup
messages
Issue 8 August 2010
UDP or TCP?
UDP
UDP
UDP
2 of 2
UDP or TCP?
UDP
UDP
UDP
TCP
TCP
UDP
TCP
1 of 3
31