Avaya one-X 9600 Series Administrator's Manual page 32

Deskphone release 6.0
Hide thumbs Also See for one-X 9600 Series:
Table of Contents

Advertisement

Network Requirements
Table 6: Transmitted Packets (Source = 9600 Series IP Telephone) (continued)
Destination Port
Release 2.0+ = TLSPORT
Pre-Release 2.0 = 411
443 unless explicitly specified
otherwise (i.e. in a URL)
500 or 4500
33434 - 33523 (starts with
33434, increments by 1 for
each message sent, 3
messages per hop, up to 30
hops)
CNAPORT
The port number received in
the Transport Address field in
the RCF message
The port number specified in
the test request message
System-specific
As specified by CM, or as
specified in a CNA RTP test
request
32 9600 Series IP Deskphone Administrator Guide Release 6.0
Source Port
Any unused
port number
Any unused
port number
500, 2070,
514
Any unused
port number
547
Any unused
port number
Any unused
port number
Any unused
port number
As specified
by CM or as
reserved for
CNA RTP
TLS/SSL packets
transmitted by the
telephone's HTTP client
during startup
TLS/SSL packets
transmitted by the
telephone's HTTP client
after startup (for example,
for backup/restore)
Transmitted IKE or IPsec
or 4500
messages (if
NVIKEOVERTCP is 0 or 1)
Transmitted Syslog
Transmitted DHCPv6
Transmitted traceroute
Transmitted CNA
registration messages
1720
H.323 signaling messages
50000
Transmitted CNA test results
system -
Transmitted signaling
specific
protocol packets
Transmitted RTP and SRTP
tests
Use
messages
messages
messages
messages
packets
UDP or TCP?
TCP
TCP
TCP
UDP
UDP
UDP
TCP
TCP
UDP
TCP
UDP
2 of 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

One-x 9611gOne-x 9621gOne-x 9641gOne-x 9608

Table of Contents