Contacts Application Administration; The 9610 Idle Application, Wmlidletime, Screensaveron, Idleapp, And Wmlsmall - Avaya one-X 9600 Series Administrator's Manual

The DATA terms "Contacts" and "Directory" are always administered in English, and are
independent of the user interface (UI) language. The administrator can create labels for the
local applications in the UI language if desired. The administrator can use, for example,
"Contacts" for a browser-based application, and "List" for the local Contacts application. Instead,
the term used presents the appropriate local application, which does present the UI in the user's
language.
The Main Menu allows up to 10 administrable objects including the two local application objects,
Contacts, and Directory so that the total number of items fit on two screens.

Contacts Application Administration

The administrator populates the Contacts Application via the backup file. Each administered
object, up to the maximum of 250, must have valid, non-null, data in both of the parameters as
indicated:
CONLABELxxx (the label displayed to the user for this object)
CONDATAxxx
In the list of parameters above, xxx is a three-digit integer from 001 to 250 inclusive. To display
and associate with the administered data, the three-digit integer must be the same for both
parameters. The xxx value includes leading zeroes as applicable.
If a given administered object has null or invalid data in any of the two associated parameters,
that object is completely ignored. Hence, to be listed in the Contacts application, both
associated parameters must be valid and non-null.
CONLABELxxx data maps to the corresponding ENTRY_NAME. CONDATAxxx maps to the
corresponding ENTRY_NUMBER_1.
All contacts are sorted in alphanumeric order on the Phone screen regardless of the order put in
the backup/restore file.
The 9610 Idle Application, WMLIDLETIME, SCREENSAVERON,
IDLEAPP, and WMLSMALL
The 9610 IP Telephone can present a variety of behaviors if the telephone is left idle for a period
of time.
WMLIDLETIME - This parameter (set in the 46xxsettings file, if administered) specifies the
number of minutes the phone must be idle before an Idle Application specified by IDLEAPP can
be presented on the display.
SCREENSAVERON - This parameter (set in the 46xxsettings file, if administered) specifies the
number of minutes the phone must be idle before the Avaya Screen Saver can be presented on
the screen.
Note:
In the current firmware version, it is not advisable to use both WMLIDLETIME
Note:
and SCREENSAVERON. For example, one value should be set to 999 and the
other to some nominal time, perhaps 30 minutes.
Special Administration for the 9610 IP Telephone
Issue 8 August 2010 171