Setting Image Orientation Priority To On/Off - Canon iR3300 Copying Manual

Setting Image Orientation Priority to On/Off

Setting Image Orientation Priority to On/Off Setting Image Orientation Priority to On/Off Setting Image Orientation Priority to On/Off
The image orientation may be printed conversely depending on the copy mode set. With this
function, you can set whether or not to copy the image in the same direction as the original image.
IMPORTANT
• • • •
This setting is not available when the Finisher-J1 is attached.
NOTE
• • • •
When Image Orientation Priority is set to [On], the first copy will take longer to process than normally.
• • • •
The default setting is [Off].
1 1 1 1
Call up the desired screen as follows: Call up the desired screen as follows:
Call up the desired screen as follows: Call up the desired screen as follows:
2 2 2 2
Select [On] or [Off], and press [OK]. Select [On] or [Off], and press [OK].
Select [On] or [Off], and press [OK]. Select [On] or [Off], and press [OK].
3 3 3 3
Press [Done]. Press [Done].
Press [Done]. Press [Done].
Repeat this procedure.
The selected mode is set and the display returns to the Basic Features screen.
3-6 3-6 Setting Image Orientation Priority to On/Off
3-6 3-6