Pres Arm(; Adjustable Tube; Control; M6 Nylon - BodyCraft STRATA Instruction Manual

STEP3A
1.Screw the threaded end of ADJUSTMENT CABLE into the threaded receptor
on ADJUSTABLE TUBE(13). Attach cable to bracket by placing washers and
nuts on each side of bracket and tighten.
2.Slide cable through rear large slot in PRESS ARM(12) along inside, out slot
toward from of PRESS ARM(12) and back into most forward slot. Being
careful to not crease the cable, pull cable end out of the top hole next to
CONTROL HANDLE(16).
3.Attach cable end to CONTROL HANDLE(16) using one M6 ROUND HEAD
SCREW(71) and one M6 NYLON NUT(78).
FIG A
83
83
14
ADJUSTMENT CABLE(83) (1920mm)
13
12
16
nut
83
12
8
13
washer
78
16
83
71
55