Lever Base(; Adjustable; Nylon - BodyCraft STRATA Instruction Manual

STEP3
1.Attach LEVER BASE(10) to LEFT WEIGHT BASE(2) using
two 1/2" x 3" HEX HEAD BOLT(61), four 1/2" WASHER(74)
and two 1/2" NYLON NUT(76).
2.Attach LEVER ARM(11) to REAR SUPPORT(3) using
3/4" x 11" AXLE(15).
Tighten LEVER ARM(11) to 3/4" x 11" AXLE(15) using
SETSCREW(73) to tighten with included hex wrench.
3.Tighten PRESS ARM(12) and LEVER ARM(11) to 3/4" x 11"
AXLE(15) using 5/16" x 1/2" SETSCREW(73) and included
HEX WRENCH.
4.Attach ADJUSTABLE TUBE(13) to LEVER ARM(11) using
1/2" x 4" HEX HEAD BOLT(59), two 1/2" WASHER(74) and
1/2" NYLON NUT(76). Tighten and then back off bolt so
that ADJUSTABLE TUBE(13) swing freely.
5.Attach CHROME INSERT TUBE(14) to PRESS ARM(12)
using 1/2" x 4" HEX HEAD BOLT(59), two 1/2" WASHER(74)
and 1/2" NYLON NUT(76).
6.Insert CHROME INSERT TUBE(14) into ADJUSTABLE
TUBE(13).
Be certain that CHROME INSERT TUBE(14) sliding smoothly
inside ADJUSTABLE TUBE(13)
3
49
49
15
41
10
61
41
2
74
61
15
49
74
59
14
49
74
11
59
41
76
74
50
76
12
16
76
74
13
96
1
7
73
38
15
3
73
15
41
96
38
12
11