BodyCraft HFT PRO Owner's Manual
  1. Manuals
  2. Brands
  3. BodyCraft Manuals
  4. Home Gym
  5. HFT PRO
  6. Owner's manual

BodyCraft HFT PRO Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Record your Product Registration Info here:
Serial Number:__________________________
Purchase Date:__________________________
Open your Camera
Dealer Name:___________________________
App, point it at the
QR Code & click the
link for additional
Register your product's warranty at:
information.
www.bodycraft.com/product-registration.html
Owner's Manual
V1.2
S E R I A L
1 2 3 4 5 6 7 8
Serial Number Location

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HFT PRO and is the answer not in the manual?

Questions and answers

Related Manuals for BodyCraft HFT PRO

Summary of Contents for BodyCraft HFT PRO

  • Page 1 1 2 3 4 5 6 7 8 Serial Number:__________________________ Purchase Date:__________________________ Open your Camera Dealer Name:___________________________ App, point it at the QR Code & click the link for additional Register your product’s warranty at: information. Serial Number Location www.bodycraft.com/product-registration.html...
  • Page 3 Your BODYCRAFT machine has all the quality and design elements to make your workout extremely efficient and comfortable. Your new HFT PRO is a serious strength machine that will keep you motivated, challenged and within reach of your fitness goals. Strength &...

  • Page 4: Table Of Contents

    - Weight Stack Ratios …...........………….………. - Boxes and What’s Inside Each One …..……….…..……………………….. - Assembled Parts Lists ............……….………. How to Assemble the HFT PRO 12 - 17 - Step 1 - Step 6 (Main Frame) Assembly .………………….………….……... - Step 7 (Main Frame) Torque Specs ……..……………………….…………..
  • Page 5 - Detailed Parts Lists ............………………… 40 - 41 Warranty - Product Warranty ..............….……..….…… - Product Warranty Re gi str ati on ..........….…..……. - Contact Us Information ………………………………………………………… For easy to read complete assembly step-by-step in full color go directly to www.bodycraft.com/HFTP-qr.html...

  • Page 6: Product Safety

    It is imperative that you retain this Assembly Instructions and be sure all warning labels are legible and intact. Replacement Assembly Instructions and labels are available from BODYCRAFT. If you are unsure about the proper use of the BODYCRAFT strength machine call your local BODYCRAFT dealer or our Customer Service Department. 800-990-5556 or support@bodycraft.com...

  • Page 7: Important Notes & Recommended Tools

    MPORTANT OTES & ECOMMENDED OOLS Important Notes and Tips: Before assembly, read all instructions thoroughly and preview diagrams to help make the installation easier. 2. Make sure all parts are accounted for and in proper condition before beginning assembly. See the parts list. 3.

  • Page 8: Machine Dimensions

    ACHINE IMENSIONS Gym Placement Planner If possible, please take advantage of the corner fit design. W A L L W A L L 23" RONT OVERALL DIMENSIONS 56.7”W x 40.6”D x 81.9”H...

  • Page 9: Product Overview Components

    RODUCT VERVIEW Rear Upright Frame Top Frame (Right) Chin-Up Bar Top Cross Support & Exercise Book Holder Top Frame (Left) Pulley Height Adjuster Single Handle Upright Frame (Right) Weight Stack Base Frame Leg Weight Panel Upright Frame (Left) End Cap NOTE: Shown with the standard 150 lb stacks.

  • Page 10: Weight Stack Ratios

    EIGHT TACK ATIOS Plate Weight at Weight at Number Stack 100% Pulley 50% Standard Dual 150lb Stack Upgrade Dual 200lb Stack NOTE: Weights are approximate...

  • Page 11: Boxes And What's Inside Each One

    (Standard Dual 150lb Stacks Upgraded to 200lb Stacks? An additional boxes 2 each @ 50 lbs per box BODYCRAFT reserves the right to make improvements at any time which may affect color, parts, materials, size, weight, or any other aspect.

  • Page 12: Assembled Parts Lists

    HFT PRO A SSEMBLED ARTS NOTE: If you are missing a listed part, it likely has been pre-installed in our factory for quality control purposes. Please continue with assembly. *Part images are not to scale.

  • Page 13: How To Assemble The Hft Pro - Step 1 - Step 6 (Main Frame) Assembly

    Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 7 TWO PEOPLE ARE REQUIRED TO ASSEMBLE THIS STEP. a. Attach Top Cross Support (8) to the Rear Upright Frame (4) using: - Four 3/8" X 2- 1/2" Hex Bolts (52) - Eight 3/8"...
  • Page 14 Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 7 a. Install End Caps (38) to the Base Frame Legs (1) on both Right (1R) & Left (1L) sides. TIP: Assembly Video of STEP 2 SCAN Picture Mode https://youtu.be/jnq JsKoshfU b.
  • Page 15 Product Assembly STEP NOTE: Assemble Rotating Pulley Holder upward on both Left and Right Sides. Left Side Right Side a. Attach two Rotating Pulley Holders (17) to the Right & Left Pulley Height Adjuster (15R & 16L) using: - Two 1/2" X 3-1/2" Hex Bolts (49) - Four 1/2"...
  • Page 16 Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 7 a. Attach Right & Left Upright Frame (2R & 3L) to the two Base Frame Legs (1) using: - Four 3/8" Black Washers (62) - Four 3/8" Black Nylon Nuts (69) Laser Cut numbers facing...
  • Page 17 Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 7 TWO PEOPLE ARE REQUIRED TO ASSEMBLE THIS STEP. a. Attach Right Top Frame (6R) to the right rear upright using: - Two 3/8" X 4" Black Hex Bolts (51) - Four 3/8"...
  • Page 18 Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 7 TWO PEOPLE ARE REQUIRED TO ASSEMBLE THIS STEP. TIP: Using a Step Ladder for the 2 tech holding the Chin Bar makes the installation easier. a. Assemble Chin Bar (7) to the Right Top Frame (6R) using: - Two 3/8"...

  • Page 19: Step 7 (Main Frame) Torque Specs

    Product Assembly STEP These recommended Torque Tighten Bolts & Nuts at this time Specs should be followed for to the Recommended Torque Specs correct assembly and safe operation of this machine. Tighten to torque specs ensure the bolts and nuts do the following: - Securely hold the frame and moving parts from coming loose during operation.

  • Page 20: Step 8 (Guide Rods) & Pre-Lube Areas

    Lube all four Guide Rods (5), lower half only, with 100% pure Silicone Lube or Teflon PTFE grease. Top half will be done later and potentially keeps lube not getting on installers clothes during the next few assembly steps. To purchase lube: www.bodycraft.com/treadlube.html APPLY apply a light layer with a clean rag.

  • Page 21: Step 9 (Weight Stacks) Decision Point

    Product Assembly STEP Decision Point 150 lb 200 lb Stacks Stacks Install STACK SPACERS (23) if you have the 150 lb Stacks, 14 plates per side, total of 28 WEIGHT PLATES (21). Then install rubber donuts (22) on both Right & Left sides. DO NOT install STACK SPACERS (23) if you have the optional heavy weight 200 lb Stacks, 19 plates per side, total of 38 WEIGHT PLATES (21).

  • Page 22: Step 10 - Step 11 (Weight Stacks) Assembly

    Product Assembly STEP TWO PEOPLE ARE REQUIRED TO ASSEMBLE THIS STEP. TIP: Leaning Guide Rods (5) inward or outward is acceptable to assemble STEP #8 - STEP #11. a. With the guides angled slightly, slide Weight Plates (21) one at a time, onto the Guide Rods (5), making sure to orient the selector pin holes facing inward and to the bottom.
  • Page 23 Product Assembly STEP a. Slide the Top Plate (19) & Selector Rod (pre TIP: Leaning Guide Rods (5) inward or assembled in Step #10) onto the Guide Rods outward is acceptable to assemble (5), running through the center holes of the STEP #8 - STEP #11.

  • Page 24: Pulley & Cable Overview

    ULLEY & ABLE VERVIEW Cutout view for detailed pulley & cable placement NOTE: Route the cables under the Cable Retainer Metal Bars on both front P3 and rear P4 pulleys. Cutout view for detailed pulley & cable placement NOTE: Actual color of Cables (27) are black. Shown in the assembly steps in RED for easy viewing.

  • Page 25: Step 12 - Step 16 (Pulley & Cable) Assembly

    Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 17 Cable (27) Ball End Bolt End 7,220 mm (284-1/4") Insert the Bolt End of the Cable (27) through Rotating Pulley Holder (17) as seen in Figure with P1 & P2 below. Then route upward towards P3 on Right Top Frame (6R) for Step #13. b.
  • Page 26 Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 17 a. Take out Bolt (50) from the front top hole of the Right Top Frame (6R). Then route Cable (27) under the metal bar towards Pulley P4 area and drop cable down towards the weight stack. c.
  • Page 27 Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 17 Place Selector Pin (41) ring over Pulley Block Bolt and thread on Nut (71) all the way up to the Pulley Block (18) base. Screw down the Pulley Block (18) on the Top Plate (19), min. 1”...
  • Page 28 Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 17 a. Route the cable up and over the two Pulleys P6 & P7 (36) mounted on the Right Top Frame (6R). Then continue down towards the Base Frame Leg (1). b.
  • Page 29 Product Assembly STEP NOTE: DO NOT tighten bolts until Step # 17 a. Pull Cable (27) down to the Pulley P8 (36) mounted at the Base Frame Leg (1). Enter Cable on weight stack side and pull upward towards bracket at the Right Pulley Height Adjuster (15R).

  • Page 30: Step 17 (Pulley & Cable) Torque Specs

    Product Assembly STEP Tighten Bolts & Nuts at this time to the Recommended Torque Specs 20 ft-lbs (+/- 2 lbs) 20 ft-lbs (+/- 2 lbs) 17 ft-lbs (+/- 2 lbs) 17 ft-lbs (+/- 2 lbs) 17 ft-lbs (+/- 2 lbs) 22 ft-lbs (+/- 2 lbs) Cable (27) Bolt End...

  • Page 31: Step 18 (Weight Panels) Assembly

    Product Assembly STEP a. Attach Right & Left Weight Panel (10R & 11L) to the Rear Upright Frames (4) using: - Eight Plastic Studs (43) - Four 1/4" X 6" Hex Bolts (54) - Eight 1/4" Washers (66) - Four 1/4" Nylon Nuts (70) TIP: Assemble: upper bolt (54) lower bolt (54)

  • Page 32: Step 19 (Weight Plate Stickers) Assembly

    Product Assembly STEP Recommended Conditions & Items for Installation of the Weight Stack Stickers MINIMUM 65 WEIGHT STACK RUBBING ALCOHOL CLEAN COTTON CLOTH DEGREES & LOW STICKERS-SHEET (74) IMPORTANT: Before installing the weight stack stickers, it is important to let the weight plates acclimate to room temperature. a.

  • Page 33: Step 20 Final Assembly Stickers Removal, Lube And Cleaning

    Product Assembly STEP Final assembly clean up, lube and polish! a. Remove all assembly stickers i.e. part numbers & right / left circles. Easy to remove with finger nail or plastic scrapper. If adhesive residue is on frame, RUBBING use rubbing alcohol, ALCOHOL then cleaner.

  • Page 34: Completed Assembly Checklist

    SSEMBLY OMPLETE Please take the following steps before using the HFT PRO Functional Trainer: 1. Make certain all bolts are tightened securely. 2. Make certain all cables are seated into all pulley grooves. A cable rubbing against steel will peel the nylon coating, voiding warranty and resulting in a need for replacement.

  • Page 35: Review Accessories & Operation Of Adjustments

    EVIEW CCESSORIES & PERATIONS DJUSTMENTS a. Hang the accessories on the Top Cross Support (8): - Two Single Handles (32) - One Chin Assist Strap (30) - One Triceps Rope (31) - One Sport Bar (12) - One Long Bar (13) - One Ankle Strap (29) - Two Chains (33) - Four Snap Hooks (34)

  • Page 36: General & Cable Inspection

    & C ENERAL ABLE NSPECTION General Inspection and Cleaning The Frame should be wiped down with a damp cloth and dried on a daily basis. The powder coat finish should be polished with a good car wax on a yearly basis. For Vinyl Upholstery use Lanolin hand cleaner to dissolve sweat and lubricate the vinyl, maintain- ing its natural flexibility.

  • Page 37: Lubrication Maintenance

    UBRICATION AINTENANCE Lubrication Bearing and linear bearing systems have advanced over the years, but they must be maintained on a regular basis if you expect them to last and perform efficiently. BODY- CRAFT uses only the highest quality bearings and linear motion components that are virtually trouble-free but they require the regular preventive maintenance to ensure long- lasting performance.

  • Page 38: Strength Cable Wear Indicators

    TRENGTH ABLE NDICATORS A TEAR, TWISTING/BINDING IN THE CABLE COVER Inspect casing to ensure wire rope is not tearing, twisting, or binding within and coil causing bulge to appear. Cable should retain same outside diameter throughout. This cable needs to be replaced as soon as possible. STRETCHED, FRAYED OR FLATTENED CABLE COVERING Any exposed wire rope protruding through the casing or at either end, has lost its structural integrity.

  • Page 39: Strength Maintenance & Routine Schedule

    TRENGTH AINTENANCE & OUTINE CHEDULE LIGHT HOME ROUTINE SCHEDULE COMMERCIAL Clean: DAILY 1 - 2 WEEKS Upholstery. Inspect: DAILY 1 - 2 WEEKS Cables or Belts and their tension. Inspect: 1 - 2 WEEKS DAILY Links, Pull Pins, Snap Locks, Swivels, and Weight Stack Pins.

  • Page 40: Parts Exploded View

    ARTS XPLODED...

  • Page 41: Detailed Parts Lists

    HFT PRO D ETAILED ARTS NOTE: If you are missing a listed part, it likely has been pre-installed in our factory for quality control purposes. Please continue with assembly. *Part images are not to scale.
  • Page 42 HFT PRO D ETAILED ARTS *Part images are not to scale.

  • Page 43: Product Warranty

    If the item exhibits such a defect, BODYCRAFT will, at its option, repair or replace it without cost for parts. Shipping and handling charges may apply. (BODYCRAFT may require return of the part(s) or photographic evidence of the damaged part(s) prior to replacement.) Serial number is required.

  • Page 44: Product Warranty Registration

    RODUCT ARRANTY EGISTRATION...

Table of Contents