Chapter 2. Preparing For The Installation; Safety Precautions - IBM SAN512B-6 Installation, Service And User Manual

Chapter 2. Preparing for the Installation

This chapter provides the following information:
v "Safety precautions"
v "Facility requirements" on page 10
v "Time and items required for installation" on page 11
v "Quick installation checklists" on page 13
v "Items shipped" on page 15

Safety precautions

When using this product, observe all danger, caution, and attention notices in this
manual. The safety notices are accompanied by symbols that represent the severity
of the safety condition.
Refer to the Cautions and Danger Notices at the end of this guide for translations
of safety notices for this product.
General precautions
© Copyright IBM Corp. 2017
DANGER
The procedures in this manual are for qualified service personnel.
DANGER
Before beginning the installation, see the precautions in "Power
precautions."
CAUTION:
Changes or modifications made to this device that are not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
CAUTION:
Disassembling any part of the power supply and fan assembly voids
the warranty and regulatory certifications. There are no
user-serviceable parts inside the power supply and fan assembly.
CAUTION:
Make sure the airflow around the front, sides, and back of the device
is not restricted.
CAUTION:
To protect the serial port from damage, keep the cover on the port
when not in use.
7