Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-8
Installation
Installing Hard Drives in The
ProLiant Storage System
The ProLiant Storage System supports both the Compaq Fast-Wide SCSI-2
(wide SCSI) and Fast-SCSI-2 (standard SCSI) hot-pluggable drives. All
Compaq hot-pluggable drives are properly configured for use in the ProLiant
Storage System and are installed in the same manner as shown below.
1. Open the front bezel.
Figure 3-2. Opening the Front Bezel
CAUTION:
Before you remove or install drives, it is advisable to
discharge static electricity from your body by touching the front chassis.
This prevents electrostatic discharge from causing interruptions during
operation.
NILE2005.AI
Fig 3-2, 5-2.EPS
Advertisement
Table of Contents
Need help?
Do you have a question about the ProLiant Storage System and is the answer not in the manual?
Questions and answers