Compaq ProLiant Storage System User Manual page 78

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side Access Panel
removing 6-2
replacing 6-9
sensor 4-7, 5-3
Site selection 2-9
SMART SCSI Array 2-6
SmartStart
creating System Configuration
Utility diskettes from 3-17
running System Configuration
Utility from 3-14
Specifications for the Storage System
A-1
Standard features of the Storage
System 1-2
Standoff, installing in backplane 6-4
Status indicator
drive access 4-4, 4-5
drive failure 4-4, 5-2
drive tray 4-4, 4-6
front bezel 4-2
on line 4-4, 4-5
redundant power supply 4-3
self test 4-5
service required 4-2, 5-1
Storage System
cabling requirements 3-4
care and maintenance 5-1
configuration 3-14
hard drive installation 3-8
introduction 1-1
operational features 4-1
specifications A-1
status indicators 4-1
Switches
voltage selection 3-11
System Configuration Utility
diskettes created from CD 3-17
running from hard drive 3-14
running from CD 3-15
T
Thermal tracking sensor 4-7
Tools needed for installing options
6-1
Troubleshooting
air flow 4-7, 5-3
drive failure 5-2
drive tray indicators 4-4
fan failure 4-7, 5-3
plenum fan 5-3
Redundant Power Supply 5-3
service required 5-1
status indicators 4-1
thermal sensor 4-7
using Insight Manager 5-1
V
Voltage selecter switch 3-11
Compaq ProLiant Storage System User Guide
I-3