Slow Start - Brother S-6200A Instruction Manual

6. USING THE G1A OPERATION PANEL (ADVANCED OPERATIONS)

6-2. Slow start

When the slow start setting is enabled, the two stitches at the sewing start after thread trimming will be sewn at 700 sti/min.
After this, the sewing speed corresponds to the treadle depression amount.
1
Activating setting mode
(While pressing the end backtack key, press the power ON switch.)
2
Selecting "SLoW" (slow start)
(Press twice)
3
Enabling and disabling slow start
4
5
25
(Setting item)
(Setting item)
(Setting value)
(Setting item)
Setting mode will be exited and normal operation will be possible.
S-6200A
When the key is pressed, the "on"
display will appear.
When the key is pressed, the "oFF"
display will appear.
Slow start enabled
...
Slow start disabled
...
NOTE:
If the start backtack key (1) is pressed once
more, the start backtack indicator will switch
off and the display will return to the setting
item.
The setting will be stored and the display will
return to the setting item.
4203M
4207M
4208M 2138M 2139M
4209M
4206M