Brother S-6200A Instruction Manual page 19

Operator
Green and yellow wire
(ground wire)
S-6200A
<200 V system >
(1) Power switch
(2) Screws [2 pcs]
4145M
1964B
(3) 3-pin power supply connector
(4) Power cord
(5) Staples [5 pcs]
1. Attach an appropriate plug to the
power cord (4). (The green and
yellow wire is the ground wire.)
2. Insert the
properly-grounded electrical outlet.
NOTE:
Take care when tapping in the
staples (5) to make sure that they do
not pierce the cords.
Do not use
otherwise
problems may result.
1965B
3. INSTALLATION
power plug into a
extension cords,
machine operation
12