Brother S-6200A Instruction Manual page 20

3. INSTALLATION
Operator
13
4145M
1966B
Green and yellow
wire (ground wire)
1967B
S-6200A
<100 V/400 V system >
(1) Power switch
(2) Screws [2 pcs]
(3) Transformer box
(4) Transformer box plates [2 pcs]
(5) Screw [with washer]
(6) 3-pin power supply connector
(7) Staples [6 pcs]
(8) Cord clamps [2 pcs]
(9) Power cord
1. Attach an appropriate plug to the
power cord (9). (The green and
yellow wire is the ground wire.)
2. Insert the power
properly-grounded electrical outlet.
NOTE:
Take care when tapping in the
staples (7) to make sure that they do
not pierce the cords.
Do not use extension
otherwise machine
problems may result.
plug into a
cords,
operation