Thread Tension; Adjusting The Thread Tension - Brother S-6200A Instruction Manual

Single needle straight lock stitcher with thread trimmer
Hide thumbs Also See for S-6200A:
Table of Contents

Advertisement

10. THREAD TENSION

10-1. Adjusting the thread tension

Turn off the power switch before removing or inserting the bobbin case.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
Good even stitches
Becomes weaker
Becomes stronger
CAUTION
Upper thread
Lower thread
0572M
Upper thread tension too weak or
lower thread tension too strong
0573M
Upper thread tension too strong
or lower thread tension too weak
0574M
2177M
Becomes weaker
Becomes stronger
3853M
<Lower thread tension>
Adjust by turning the adjustment screw (1) until the bobbin
case drops gently by its own weight while the thread end
coming out of the bobbin case is held.
<Upper thread tension>
After the lower thread tension has been adjusted, adjust the
upper thread tension so that a good, even stitch is obtained.
1. Lower the presser foot.
2. Adjust by turning the tension nut (2).
S-6200A
10. THREAD TENSION
Increase the upper thread tension.
Decrease the lower thread tension.
Decrease the upper thread tension.
Increase the lower thread tension.
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents