Adjusting The Needle Up Stop Position - Brother S-6200A Instruction Manual

8-2. Adjusting the needle up stop position

1
(While pressing the
2
Selecting "UpoS xxx"
(Press once)
3
Needle up stop position setting
4
5
* For details on other adjustment items, refer to the Service Manual.
8. USING THE G5A OPERATION PANEL (ADVANCED OPERATIONS)
key (1), press the power ON switch.)
(Setting value)
Example:
Becomes higher
Becomes lower
The setting values will be memorized.
Normal sewing machine operation will then be possible.
"MorG xxx" will appear in orange in the main display (2).
"xxx" is the setting value for the needle up stop position, and
"0" is the default setting.
If you press the
and the needle up stop position will become lower.
If you press the
and the needle up stop position will become higher.
The setting range is from –5 to 10.
* A setting value of "10" corresponds to an angle of rotation
of approximately 10° for the upper shaft.
S-6200A
4189M 2138M
key, the setting value will increase
key, the setting value will decrease
2044B 2138M 2139M
4190M
4192M
4193M
40