Table of Contents
Advertisement
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
4-6-4. Slow start
If slow start is enabled, occurrences of the thread pulling out can be reduced.
1
Selecting "A07 SLow" (slow start)
2
Press either.
3
Displaying the slow start setting value
Setting slow start
4
(Slow start disabled) (Slow start enabled)
5
Press the
key.
27
In sewing standby mode, press the
the
key to switch to function setting mode.
・ "A01 UPdn" will be displayed.
Press the -
or +
key to select "A07 SLow".
+
・ When the
key is pressed, the next setting is displayed.
-
・ When the
key is pressed, the previous setting is displayed.
・ When the
key is pressed, the setting value is displayed.
・ When the D
key is pressed, the setting value increases in the
order "oFF", "1", "2", "3", "4".
・ When the C
key is pressed, the setting value decreases in the
order "4", "3", "2", "1", "oFF".
・ When the
key is pressed, the initial value will be reset.
・ Sewing speed for first 4 stitches when slow start is enabled
1: 400, 400, 400, 4000*
2: 400, 400, 4000*, 4000*
3: 700, 700, 4000*, 4000*
4: Set using memory switch Nos. 403 to 406.
* If the maximum sewing speed is set to 4,000 sti/min
NOTE:
If the
key is pressed once more, the
will switch off and the display will return to the setting item.
Setting mode will be exited and normal operation will be possible.
S-7780A
key while holding down
1369D
1377D
indicator
1378D
Advertisement
Table of Contents
