Sewing Start And End Backtack Stitches - Brother S-6200A Instruction Manual

5-2. Sewing start and end backtack stitches

0841M
1
Setting start backtack stitches
2
Setting end backtack stitches
3
4
Start backtacking is carried out. After it has finished, normal sewing continues for as long as
the treadle remains depressed.
NOTE:
If the treadle is returned to the neutral position, the sewing machine will continue
operating until the set number of start backtack stitches has been sewn.
End backtacking is carried out. After it has finished, the thread is trimmed automatically and
the sewing machine stops in the needle up position.
NOTE:
If the treadle is depressed backward before sewing of the set number of start backtack
stitches is complete, end backtacking will not be carried out.
If thread trimming lock is set, the sewing machine will stop in the needle up position
without thread trimming being carried out.
5. USING THE G1A OPERATION PANEL (BASIC OPERATIONS)
S-6200A
For example,
3 stitches and
4 stitches
4200M
Example:
4201M
2159M
2160M
22