Connecting The Cords - Brother S-6200A Instruction Manual

3-4-2. Connecting the cords

Lower the tab (6).
Push in securely until the tabs (6) engage.
<Removal>
<Securing>
Cords
<Closing the cover>
Raise the tab (6).
Press
the tab.
4139M
4140M
4141M
S-6200A
3. INSTALLATION
(1) 6-pin head detector unit connector
(2) 12-pin operation panel connector
(3) 10-pin resolver connector
(4) 14-pin machine connector
(5) 4-pin motor connector
1. Binding the cords
(1) Repeat cable tie
NOTE:
Bind the cords in such a way that the
connector does not get pulled out.
All cords that come out from the
control box should be secured to the
cord holder (2) using the repeat cable
tie (1), otherwise vibration from the
sewing machine may cause the cords
to become disconnected, which can
cause problems with the operation of
the control box.
10