Installation; Table Processing Diagram - Brother S-6200A Instruction Manual

3-1. Table processing diagram

The top of the table should be 40 mm in thickness and should be strong enough to hold the weight and with-stand the
vibration of the sewing machine.
Drill holes as indicated in the illustration below.
NOTE:
Check that processing has been carried out accurately to these dimensions (4 places). If the dimensions
are too deep, the safety switch may become damaged when setting up the machine head.

3-2. Installation

Control box mounting hole
1957B
S-6200A
3. INSTALLATION
Cotton stand hole
Cord hole
1. Control box
(1) Control box
(2) Bolts [3 pcs]
(3) Nuts [3 pcs]
(4) Spring washers [3 pcs]
(5) Washers [3 pcs]
2. Connecting rod
(6) Connecting rod
(7) Nut
1956B
4