Brother S-6200A Instruction Manual page 14

3. INSTALLATION
7
1961B
S-6200A
9. Motor cover
1. Use the two bands (2) to bind the
cord (1) of the operation panel to the
other cords as shown
illustration, and then pass it through
the cord hole in the table.
2. Install the motor cover (3) as shown
in Figure [A], and then securely
tighten it with the four screws (4).
* Fit the end of the pulley cover (5)
into the grooves in the motor
cover (3) (in 3 places) as shown
in Figure [B].
in the