Keyboard; Beeper - Intermec EasyCoder PF2i User Manual

Keyboard

The keyboard is of the membrane-switch type and has 22 keys. The
keyboard is supplemented by a large "Print" button on the printer's front.
Some keys have hard-coded functions in the startup and setup modes.
Print button
+
+
Keyboard Color Code
Yellow
Green
White
In application programs created using the Intermec Fingerprint pro-
gramming language, the keys can be assigned to various functions or
be disabled individually. Since one key is assigned as shift key, up to 44
different key combinations are possible. An audible signal, which can be
turned off if so desired, acknowledges that a key has been pressed.

Beeper

The beeper notifi es the operator when an error has occurred and
acknowledges that a key has been pressed. The Intermec Fingerprint pro-
gramming language allows the key acknowledge signal to be turned off.
The frequency and duration of signals can be specifi ed. Thus, it is pos-
sible to create different signals for different conditions or even to make
the printer play simple melodies!
Intermec EasyCoder PF2i—User's Guide (Fingerprint version)
Feed/Pause a print job. Repeat last printed label.
Toggle between pause and printing when executing a print job.
Interrupt a running Fingerprint program.
Enter the Setup Mode (see Chapter 7).
Feed out a blank label or the equivalent.
Perform a Testfeed (feed a blank label, adjust the media feed).
Display the settings for the active communication channel.
Browse between communication channels after having pressed
the F5/i key.
Operation of the printer (operator level)
Setup or service (site or service technician level)
Data input to printer (operator or technician level)
Chapter 2—Installation
15