Setup Mode Overviews - Intermec EasyCoder PF2i User Manual

Setup Mode; Serial Communication "uart1:"
(Intermec Fingerprint v8.10)
SETUP: SETUP:
SER-COM, UART1 SER-COM, UART2
See separate overview
SER-COM, UART1: SER-COM, UART1:
BAUDRATE CHAR LENGTH
BAUDRATE; CHAR LENGTH
9600 BAUDRATE; 8
CHAR LENGTH
19200 BAUDRATE; 7
38400
BAUDRATE;
57500 BAUDRATE;
115200 BAUDRATE;
300
BAUDRATE;
600 BAUDRATE;
1200 BAUDRATE;
2400
BAUDRATE;
4800
Scroll forward
Scroll back
FLOW CONTROL:
XON/XOFF
XON/XOFF:
DATA TO HOST
DATA TO HOST:
DISABLE
DATA TO HOST:
ENABLE
Scroll forward
Scroll back
Legend:
Dotted boxes and lines indicate options.
Thick boxes indicates default options.
Values inside brackets indicate default settings.
Intermec EasyCoder PF2i—User's Guide (Fingerprint version)
SETUP: SETUP:
SER-COM, UART3 NET-COM, NET1
See separate overview See separate overview
SER-COM, UART1: SER-COM, UART1:
PARITY STOP BITS
PARITY: STOP BITS:
NONE 1 STOP BITS:
PARITY:
EVEN 2
PARITY:
ODD
PARITY:
Scroll forward
MARK
PARITY:
Scroll back
SPACE
Scroll forward
Scroll back
SER-COM, UART1:
NEW LINE
NEW LINE:
CR/LF
NEW LINE:
LF
NEW LINE:
CR
XON/XOFF:
Scroll forward
DATA FROM HOST
Scroll back
DATA FROM HOST:
DISABLE
DATA FROM HOST:
ENABLE
Scroll forward
Scroll back
Chapter 7—Setup Mode
SETUP:
NETWORK
See separate overview
SER-COM, UART1:
FLOWCONTROL
FLOW CONTROL: FLOW CONTROL:
RTS/CTS ENQ/ACK
RTS/CTS: ENQ-ACK:
DISABLE ENQ/ACK: DISABLE ENQ/ACK:
ENABLE ENABLE
Scroll forward Scroll forward
Scroll back Scroll back
SER-COM, UART1: SER-COM, UART1:
REC BUF TRANS BUF
REC BUF: TRANS BUF:
[1024]: [1024]:
Continued on
the next page
63