Memory Card - Intermec EasyCoder PF2i User Manual

Memory Card

If you want to use a memory card, you must insert it into the slot in the
printer's rear plate before you switch on the power. The memory card
must be a CompactFlash card (8MB-1GB). CompactFlash cards marked
"CF+" will not work. You can use the CompactFlash card to expand
the printer's storage memory ("card1:"). There are also three types of
preprogrammed CompactFlash cards:
• Font Cards provide additional fonts that can be used as long as the
card remains inserted in the printer.
• Font Install Cards permanently install additional fonts in the printer,
which can be used even after the card has been removed.
• Firmware Cards automatically replace the printer's fi rmware, usually
with an updated version.
CompactFlash cards are widely used for consumer's computer products
like digital cameras. You can get a certain protection from theft by install-
ing an optional plate that covers an inserted CompactFlash card.
Note: Always switch off the power before inserting or removing
a memory card! The card will only fi t in one way. A memory
card is only detected if it is inserted before the printer is
started.
Intermec EasyCoder PF2i—User's Guide (Fingerprint version)
Chapter 3—Starting Up
CompactFlash
memory card
Protection plate
with screw
(option)
19