Boot Menu Options
Boot menu options are described in Table 3-16.
Option
QuickBoot
Boot Time Diagnostic Screen
Preboot Execution
Environment
Boot Device Priority Submenu
Boot Device Priority Submenu
Table 3-17. describes settings in the Boot Device Priority submenu.
1. [Floppy Disk Drive]
2. [Hard Disk Drive]
1. [Hard Disk Drive]
2. [Floppy Disk Drive]
Table 3-16. BIOS Setup Boot Menu Options
Settings
Disabled
Enabled
Auto
Disabled
Enabled
Disabled
Enabled
Table 3-17. BIOS Setup Boot Sequence Submenu
Setting
Determines the order that the systems searches
drives for a bootable image.
Tap on item 2 to change the boot sequence.
Description
Determines whether the full set of tests are run
during the Power-On Self Test (POST).
When [Enabled] is selected, a less extensive
memory test is performed and the size of installed
memory is not displayed during the memory test.
When [Auto] is selected, diagnostic tests will either
be skipped or performed according to the order of
the ACPI OS.
When [Disabled] is selected, the full set of tests is
run.
Determines whether status messages are displayed
as the Power On Self Test (POST) is performed.
Select [Enabled] to display messages.
If [Disabled] is selected, messages are not displayed
and the logo screen is displayed. (If POST errors
occur, POST messages are displayed regardless of
this setting.)
Determines whether the boot up from a network
server.
Select [Enabled] to allow the system to boot from a
network server (Preboot Execution Environment).
If [Disabled] is selected, this feature is disabled.
Select this submenu to configure the order in which
drives are searched for a bootable image.
Description
BIOS Setup
3
3
24