This product data does not constitute a warranty. Specifications are subject to change without knowledge. Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited; Stylistic is a registered trademark of Fujitsu Computer Systems Corporation.
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t - U s e r ’ s G u i d e NOTICE Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC NOTICES...
Type of device connected, if any ■ Fujitsu Online You can go directly to the online Fujitsu product catalog for your system by going to the Fujitsu Web site at: us.fujitsu.com/computers You must have an active internet connection to use the online URL links.
The following optional accessories can be used with the Stylistic CT2000 Series CE Tablet. For part numbers and ordering information, go to the Fujitsu Web site at: us.fujitsu.com/computers; the list is updated frequently. Refer to the instructions provided with these accessories for details on their use.
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n O n e STYLISTIC CT2000 SERIES CE TABLET FEATURES Features and controls that you use to operate the Stylistic CT2000 Series CE Tablet are outlined below and illustrated in Figures 1-2 through 1-8.
Pen Holder (inside system) Battery Release Latch Power On/Off Switch (Under Battery) Removable Battery Spring-loaded Battery Release Latch RESET Reset Button Figure 1-3. Stylistic CT2000 Series CE Tablet Features (Back View) Back Features: • Removable battery: Can be removed and replaced with a charged battery.
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n O n e Figure 1-4.
USB Port Audio Jack Compact Flash (CF) Slot Figure 1-6. Left Side View Left-Side Features: • USB port: Allows you to connect Universal Serial Bus devices (USB Standard Revision 1.1) to the tablet. Additional USB ports are located on the optional tablet cradle.
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n O n e KEY/BUTTON PAD The Stylistic CT2000 Series CE Tablet has a handy key/ button pad that can be used for performing a variety of...
CONNECTORS, BUTTONS, AND PERIPHERAL INTERFACES Connectors and peripheral interfaces on the Stylistic CT2000 Series CE Tablet allow the connection of a variety of devices. Specific locations are illustrated in Figures 1-2 through 1-5. Connector/ Tablet Icon Peripheral DC input connector USB Port PCMCIA Card slot...
Using Your Stylistic CT2000 Series CE Tablet...
Screen protectors are available as optional accessories for your tablet. (For part numbers and ordering information, go to the Fujitsu Web site at: us.fujitsu.com/computers.) To install a screen protector, refer to “Protecting the Display” on page 33.
(For part numbers and ordering information, go to the Fujitsu Web site at: us.fujitsu.com/ computers.) • Do not use a ballpoint pen or any sharp object on the tablet. Doing so can scratch the screen surface.
Use the Calibration Utility. Open the Fujitsu Menu ■ (See “Using the Fujitsu Setup Menu” on page 24). Select “Run a Program” and in the window that appears, type in “\Windows\Calibration.exe”, or browse to the location of the file. Click [OK] and the calibration utility will start.
Note that if any of the three states is set to “Never”, the system will never suspend automatically. • Reduce the backlight brightness using the brightness button or using the Backlight selection in the Control Panel (reference the section of this chapter entitled “Adjusting the Display Brightness”...
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n T w o The CF card slot does not have an eject button, so try to use cards that are long enough to extend from the CF card slot.
Using Your Stylistic CT2000 Series CE Tablet Software...
In order to use ActiveSync, you must have the optional tablet cradle. To purchase a tablet cradle, go to the Fujitsu Web site at: http://us.fujitsu.com/computers, and navigate to the accessories section. To install ActiveSync, you must first download it from the Microsoft Web site to the host computer.
• Before attempting to synchronize the tablet with the host computer, you must power up the tablet before inserting it into the tablet dock. • Be sure to insert the tablet carefully in the dock. Failure to align the interface connectors could result in synchronization problems.
[F3] function button. USING THE FUJITSU SETUP MENU The Fujitsu Setup menu provides a central location for you to find helpful utilities when using your system. To access the Setup menu, first reset the system by lightly pressing the Reset button on the back of the system using the tip of your pen (see Figure 1-3.) While the...
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu Computer Systems Corporation may invalidate the user's right to operate this equipment.
Before Using the Wireless LAN This manual describes the basic operating procedures for the wireless LAN (referred to as the “device” in this manual) and how to set up a wireless LAN network. Before using this device, read this manual carefully to ensure correct operation of the device.
15 for information on performing a cold reset. The second method of re-enabling the WLAN follows: 1. Open the Fujitsu setup menu by holding the [CLR] button while warm-booting the system (i.e., pressing the small recessed reset button on the back of the system).
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n F o u r Connection using Windows CE .NET FLOW OF OPERATIONS The wireless LAN connection procedure contained in...
If checked, clear the check mark from the [The key is provided automatically] check box. c. Enter data in Network key: Depending on the number of entered characters or digits, whether the key is an ASCII character code or a hexadec- imal code will be identified automatically.
Screen protectors are available as optional accessories for your tablet. (For part numbers and ordering information, go to the Fujitsu Web site at: us.fujitsu.com/computers.) Be sure to use only screen protectors that are designed for your tablet.
Solutions to some common problems are described in the following sections. If you are experiencing a problem with your Stylistic CT2000 Series CE Tablet that you cannot solve by taking the actions described, contact your local help desk or reseller, or call Fujitsu Service and Support at 1-800-8Fujitsu (1-800-838-5487) for further assistance. Problem...
USER RESPONSE TO MESSAGES If at any time you receive one of the following messages, take the action described in the following table. Message “Main batteries very low” “Low backup battery” “No application has been installed. Press ‘BKS’ to continue.” “The contents of memory has been lost.
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n S i x ERROR CODES Occasionally, it may be necessary to restore specific applications.
Error code Name -126 VALUE_NAME_ERROR -127 VALUE_DATA_ERROR -131 NOT_FIND_CONFIG -132 NOT_FIND_SYSTEMREG -133 NOT_CREATE_STARTUP -134 NOT_BACKUP_FILE -141 NOT_APP_INSTALL -999 SYSTEM_ERROR T r o u b l e s h o o t i n g a n d F A Q s Error The registry name that was read is invalid.
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n S i x FREQUENTLY ASKED QUESTIONS (FAQS) The following list contains answers to some of the most frequently-asked questions pertaining to the Stylistic...
T r o u b l e s h o o t i n g a n d F A Q s Do I need to download any additional software to develop applications using Visual Studio 2003? Yes. You need to download and install the CE Utilities for VS.
Stylistic CT2000 Series CE Tablet Hardware Specifications The following table provides hardware specifications of the Stylistic CT2000 Series CE Tablet by category. Stylistic CT2000 Specifications Physical Specifications Dimensions 8.07" w x 11.4" h x 0.98" d (205 mm x 290 mm x 25 mm) Weight 2.20 lbs.
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n E i g h t Glossary AC adapter An adapter that provides external power (not battery...
CE Tablet and your desktop computer. file conversion The process of converting Windows-compatible files on your desktop computer to Windows CE-compatible files on your tablet, and vice versa. Fujitsu Computer Systems Corporation (us.fujitsu.com/ computers). full reset See reset. IEEE802.11b One of the wireless LAN standards prescribed by the 802.11 committee in charge of establishing standards of...
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – S e c t i o n E i g h t correctly receive data, normal communications can be restored by setting the size of MTU to a smaller value.
reset Depending on the state of your Stylistic CT2000 Series CE Tablet, a process that either causes the system to reboot or erases all data stored in RAM. restore To return your Stylistic CT2000 Series CE Tablet to the state it was in when it was backed up. This involves copying your backup data to your tablet.
• When installing new applications, be sure to store the .hht files and installation files to the root directory. • Applications installed from the Fujitsu menu are stored in a Flash Disk subdirectory. • If you do a cold reset, all new applications that have been installed will disappear.
After creating the setup file, start installation of the appli- cations. Do a warm reset and hold the [CLR] button down while the system boots up. The Fujitsu setup menu will appear. Tap [Install an application] on the menu to start installa- tion.
3. If you receive a message on your desktop asking if you want to set up a partnership, click [No], then [Next]. 4. Verify that the Fujitsu Setup menu is open on the tablet. 5. Tap the [Install an Application] button.
S t y l i s t i c C T 2 0 0 0 S e r i e s C E T a b l e t U s e r ’ s G u i d e – A p p e n d i x DEVICE PROPERTIES Initializing the Tablet 1. Open the Fujitsu setup menu by holding the [CLR] button while warm-booting the system (i.e., pressing the small recessed reset button on the back of the system).
The CT2000 CE Tablet Explorer enables files to be copied, deleted or the like. Referencing a file and folder 1. Open the Fujitsu setup menu by holding the [CLR] button while warm-booting the system (i.e., pressing the small recessed reset button on the back of the system).
CT2000 CE Tablet has a Desktop function. Desktop mode enables you to operate the tablet without installing an application program. 1. Open the Fujitsu setup menu by holding the [CLR] button while warm-booting the system (i.e., pressing the small recessed reset button on the back of the system).
TERMINAL SERVICE SETTING • Prior to using the Remote Desktop Protocol, you must first configure the Terminal Service Settings which can be accessed by double-clicking on the Terminal Service Setting icon in the Control Panel. • If the server is not configured, the system will suspend.